Hardware Management Console Readme For use with Version 7 Release 7.7.0 Service Pack 2 Contents The information in this Readme contains fix list and other package information about the Hardware Management Console. * HMC V7 R7.7.0 SP2 <#MH01354> * Package information <#package> * Enhancements and new function <#enhance> * List of fixes <#fixes> * Installation <#install> * Additional information <#additional> PTF MH01354 HMC V7 R7.7.0 Service Pack 2 This package is HMC Version 7 Release 7.7.0 Service Pack 2. You can reference this package by APAR# MB03691. This image can be installed on top of HMC Version 7 Release 7.7.0 Recovery installation (MH01343) with Mandatory eFix (MH01345) or HMC V7 Release 7.7.0 Service Pack 1 (MH01346) with or without additional PTFs installed. /Package information/ Package name Size Checksum (sha1sum) APAR# PTF# HMC_Update_V7R770_SP2.iso 1429821440 2ced16ac0fe2d690077f01dcf31332496796b243 MB03691 MH01354 Splash Panel information (or lshmc -V output) After installing the Recovery package Version: 7 Release: 7.7.0 Service Pack: 2 HMC Build level 20130503.1 ","base_version=V7R7.7.0 " Enhancements This package provides the following and enhancements and new function: * OpenSSL upgrade to version 1.0.1e. * Added management console support for the 8268-E1E MTMS. * Added support for an "end of service" server firmware level to block install of unsupported firmware levels for certain POWER 7 model ExC servers. Back to top <#ibm-content> List of fixes This package provides the following fixes: General fixes * Fixed issue with ssh logon failures not getting logged to rsyslog. * Fixed issue with possible errors reported when setting max memory values over 8000GB. * Updated description of I/O adapter card to "FC3172 2-port 8Gb Fibre Channel Adapter". * Updated description of I/O adapter card to "EN4054 4-port 10Gb Ethernet Adapter". * Fixed issue with setting the memory to zero along with the processor units, when activating a dynamic SPPL capable system. * Fixed issue with displaying Japanese font. * Fixed issue with accessing ASMi from local HMC due to untrusted connection. * Fixed a problem with mapping multiple virtual switches on a migration operation. * Fixed issue with HMC using power saving mode on monitor. * Fixed issue with viewing virtual network data while adding virtual ethernet adapter during the create partition wizard for a remote restart capable partition. * Updated description of I/O adapter (CCIN 57B4) to "SAS RAID Controller, PCIe3 x8, Quad-port 6GB". * Fixed issue where a non-hscroot user can't activate new VIOS from GUI. * Fixed issue with Primary PSP selection always reverting to "None" when creating a shared memory pool. * Fixed issue where a group migration with invalid remote user/hmc credentials or without proper authentication setup fails as expected, but blocks further migrations from the same hmc. * Fixed an issue where the Network adapters dropdown list may contain the word 'Error" as an option in VIOS install wizard. * Fixed issue with possible LparCmdRM crash if VIOS command returns invalid data. * Fixed issue with numeric filtering on device size in shared memory pool properties. * Fixed issue with device selection Minimum Size filter not working properly on Reserved storage Pool page. * Fixed several issues with pedbg. * Fixed issue with incorrect partition identifier encountered in HSCLB600 message. * Updated the supported OS levels under Manage Install Resources. * Fixed an issue where activating a VIOS partition with partition id greater than 1 may fail with HSCL058A and HSCL05E9. * Fixed a problem where lshmcencr -c webui -t a did not return all supported encryptions. Repair and Verify * Fixed issue with displaying multiple FRUs callouts for repairing a problem on a blade. * Fixed issue with performing RV on Single Node 8412-EAD. * Fixed issue with RV on POWER 5 595 failing with return code 34. * Fixed issue with NullPointerException occurring during RV's 'wait for connection' procedure on FSP exchange. * Fixed location code inconsistencies for POWER7 ExC Memory DIMMs. * Fixed issue with PHRU utility causing confusion when you choose GX Adapter after the DSE panel. Security * Fixed security issue with SSL weak/medium cipher suites supported Port 9960. * Open SSL security fixes including CVE-2013-0169 CVE-2012-2686 CVE-2013-0166 (878630) * Fixed "Slow HTTP POST vulnerability" * Fixed instance of "Reflected Cross-Site Scripting (XSS) Vulnerabilities" Back to top <#ibm-content> Installation Installation instructions for HMC Version 7 upgrades, updates and corrective service can be found at these locations: Installation methods for HMC Version 7 updates and fixes Upgrading or restoring HMC Version 7 Instructions and images for upgrading via a remote network install can be found here (for all HMC releases): HMC network installation images Back to top <#ibm-content> Additional information Notes: 1. To burn the ISO image to media, you _must_ use DVD-R media 2. The HMC *Install Corrective Service* task has been modified to allow corrective service installation by using the .iso packaging of the corrective service files that you can download from IBM. There is no requirement to burn CD-R or DVD-R media to use these files to install the corrective service. * To install the updates over the network, select the .iso file in the *Select Service Package* panel of the *Install Corrective Service* utility. * To use USB flash media to install updates, copy the .iso file to the flash media, and then select the file when prompted. 3. The *updhmc* command line command has also been modified to use the .iso file for installing corrective service updates. To use the command, follow the syntax in this example: updhmc -t s -h -f -u -i In all cases, the HMC application extracts the files needed to install the corrective service. Back to top <#ibm-content>