Hardware Management Console Readme For use withVersion 7 Release 7.8.0 Service Pack 2 Last updated: 7 Dec 2015 Contents The information in this Readme contains fix list and other package information about the Hardware Management Console. * PTF MH01570 <#MH01570> * Package information <#package> * List of fixes <#fixes> * Installation <#install> * Additional information <#additional> PTF MH01570 This package includes fixes for HMC Version 7 Release 7.8.0 Service Pack 2. You can reference this package by APAR# MB03936 and PTF MH01570. This image must be installed on top of HMC Version 7 Release 7.8.0 SP2 (MH01432) with or without additional PTFs. *Note:* This PTF supersedes MH01458, MH01511, MH01504, and MH01518, MH01536, and MH01548. /Package information/ Package name Size Checksum (sha1sum) APAR# PTF# MH01570.iso 1482035200 e7f110330b9936cd552ad40cc9585cfb38f3edb8 MB03965 MH01570 Splash Panel information (or lshmc -V output) * *"version= Version: 7 Release: 7.8.0 Service Pack: 2 HMC Build level 20150924.1 MH01570: security updates (09-24-2015) ","base_version=V7R7.8.0 " Known Issues * After applying this PTF, the local restricted shell terminal task fails. The rshterm window does not open, no error is returned. This issue will be fixed in a future PTF. List of fixes *Security Fixes* * Fixed net-snmp vulnerability: CVE-2014-3565 * Fixed strongswan vulnerability: CVE-2015-4171 * Fixed glibc vulnerability: CVE-2014-8121 **General fixes* * * Enhanced the error message returned now for a Recover Partition Data task error previously resulting in misleading HSCL0006 & HSCL002A errors due to the target server missing required VET codes. * Fixed an issue that caused duplicate MAC addresses after the system went to Recovery and a Recover Partition Data -> Restore task was executed. *Previously released fixes also included in this PTF: * * MH01548* 08/12/15 *Security Fixes* * Fixed multiple Java vulnerabilities: CVE-2015-4733, CVE-2015-4732, CVE-2015-2590, CVE-2015-4731, CVE-2015-4748, CVE-2015-2664, CVE-2015-2621, CVE-2015-2601, CVE-2015-4749, CVE-2015-2625, and CVE-2015-1931 * Fixed Kerberos vulnerabilities: CVE-2014-5353 and CVE-2014-5355 * Fixed multiple openssl vulnerability: CVE-2014-8176, CVE-2015-1788, CVE-2015-1789, CVE-2015-1790, CVE-2015-1791, CVE-2015-1792, and CVE-2015-3216 * Fixed NTP vulnerabilities: CVE-2015-1799 and CVE-2015-3405 **General fixes* * * Updated description for 5767 incorrect on HMC SX instead of TX. * Fixed issue of Backup CCD failed with HSCP0200. * Fixed issue of bkconsdata over nfs to NFSv4 server fails. * Fixed issue of CEC going in recovery due to IOR lpar not defined in save area. * MH01536* 07/14/15 *Known Issues: * * The install may fail on HMCs that have a certificate signed with a weak signature algorithm. Users can verify the HMC Certificate Signature Algorithm and update the certificate if needed prior to installing this PTF. For further information and instructions on preventing or resolving the issue see: http://www.ibm.com/support/docview.wss?uid=nas8N1020801 * Beginning June 30, 2015, a new server is required for customers using Electronic Service Agent on the HMC to Call Home to IBM. Ensure any external firewall allows https connection to new server IP 129.42.50.224. For a list of all required IP addresses and ports see the whitepaper "ESA for HMC Connectivity Security for IBM POWER6, POWER7 and POWER8 Processor-Based Systems and IBM Storage Systems DS8000" available at: http://www-01.ibm.com/support/esa/security.htm *Security Fixes* * Fixed multiple Java vulnerabilities: CVE-2015-0480, CVE-2015-0486, CVE-2015-0488, CVE-2015-0478, CVE-2015-0477, CVE-2015-1916 * Fixed httpd and openssl "Logjam" vulnerability: CVE-2015-4000 * Fixed Multiple Heap Buffer Overflow, "Zero Day", Vulnerabilities: CVE-2014-8139 CVE-2014-8140 CVE-2014-8141, CVE-2014-9636 * Fixed a potential security issue with viosvrcmd. *General fixes* * Updated the code signing certificate for the vterm applet. * MH01518* 05/07/2015 *Security Fixes* * Fixed multiple vulnerabilities in OpenSSL: CVE-2015-0207, CVE-2015-0208, CVE-2015-0209, CVE-2015-0285, CVE-2015-0286, CVE-2015-0287, CVE-2015-0288, CVE-2015-0289, CVE-2015-0292, CVE-2015-0293, CVE-2015-1787 * Fixed multiple vulnerabilities in Tomcat: o CVE-2014-0075, CVE-2014-0095, CVE-2014-0096, CVE-2014-0099, CVE-2014-0119 o CVE-2014-0230 o CVE-2013-4444 o CVE-2014-0227 * Fixed multiple vulnerabilities in glibc: CVE-2013-7423, CVE-2014-7817, CVE-2014-9402, CVE-2015-1472 * Fix for RC4 stream cipher "Bar Mitzvah" vulnerability: CVE-2015-2808 *General fixes* * Fixed an issue with Leap Second, where HMC could encounter a system hang or performance degradation after the leap second is added at the end of June 30th 2015. * RC4 based ciphers have been disabled. * MH01504* 04/06/2015 *Security Fixes* * CVE-2015-0204, CVE-2015-0138 (Freak) *General fixes* * Fixed a problem where HMC was enabling weak ciphers that were not in the lshmcencr enabled cipher list. * MH01511* 03/17/2015 * Fixed a problem that can cause errors with PowerVC and the enhanced GUI tasks. *MH01502* 03/09/2015 *Securityfixes* * Fixed multiple vulnerabilities in Network Time Protocol (NTP): (CVE-2014-9293, CVE-2014-9294, CVE-2014-9295, CVE-2014-9297, CVE-2014-9298) * Fixed multiple vulnerabilities in IBM Java SDK: (CVE-2015-0410, CVE-2014-6593) *General fixes* * Fixed an issue where the java applet causes the HMC console to stop responding to input when a vterm is open for a long time and/or when F10 is pressed in the vterm * Fixed an issue where launching ASM to POWER5 systems in failed authentication state would result in a blank screen. * MH01458* 02/12/2015 *Security Fixes* * NTP security fix for CVE-2014-9295 * Fixed a problem where the HMC local login's browser session attempts to connect to external, non-IBM IP addresses. * Fix for GNU C library (glibc) vulnerability that has been referred to as GHOST: CVE-2015-0235 * openssl security fixes for: CVE-2014-3570, CVE-2014-3571, CVE-2014-3572, CVE-2014-8275, CVE-2014-3569, CVE-2015-0205, CVE-2015-0206 *General Fixes* * Updated mkprofdata manpages * Fixed a problem where custom groups may be removed when HMC is rebooted. * Fixed a problem where mkprofdata command was unable to recover partition data successfully leaving system in recovery. * Fixed a problem where chlparutil -s command has no effect on sample rate * Fixed a problem where HMC Master/Slave replication may fail. * Fixed a problem where problem analysis for a server or frame may stop causing service events to not be reported * Fixed a problem where ASM task failed to connect to POWER5 servers. * Corrected wording for IBM i partitions on performance panel. * Fixed a problem where HMC incorrectly allowed 8205-E6C to upgrade to an unsupported firmware level. * Fixed a problem where HMC reboot hangs at initializing or boots but fails to list any servers * Fixed an issue where after an HMC upgrade, lshmcencr may list no active ciphers with weak ciphers enabled on the web GUI. Back to top <#ibm-content> Installation Installation instructions for HMC Version 7 upgrades, updates and corrective service can be found at these locations: Installation methods for HMC Version 7 updates and fixes Upgrading or restoring HMC Version 7 Instructions and images for upgrading via a remote network install can be found here (for all HMC releases): HMC network installation images Additional information Notes: 1. The Install Corrective Service task now allows you to install corrective service updates from the ISO image files of these updates. You can download these ISO image files for the HMC, and then use the ISO image file to install the corrective service update. You no longer need to burn CD-R or DVD-R media to use the ISO image file to install corrective service. 2. This image requires DVD -R media. 3. To install updates over the network, select the *.iso file on the "Select Service Package" panel of the Install Corrective Service task. The HMC application extracts the files needed to install the corrective service. If you are using USB flash media, copy the *.iso file to the flash media, and then select the file when prompted. 4. The *updhmc* command line command has also been modified to use the *.iso file. To use the command, follow the syntax in this example: updhmc -t s -h -f -u -i In all cases, the HMC application extracts the files needed to install the corrective service. Back to top <#ibm-content>