What’s new in 6.3.0.1

Now Windows 7 and Red Hat 5 are supported.

Call Ticket	Internal number	Synopsis	Release Notes Text
7013064	TLOG#28238	Telelogic ITEX 4.6 patch level 4 Problem with de-referencing members	Members de-referencing for SEQUENCE, SET, SEQUENCE OF and SET OF that are the InsteadOfValues was implemented.
4041596	TLOG#29869	Hanging due to Signals not consumed	The problem in TTCN Suite RTL, that may cause hang and then crash when not-defined value used as index of SEQUENCE OF, is now fixed.
1066081	TLOG#45646	RH5: Copy/paste of text on linux doesn't work.	On Linux RedHat 5 when editing text in the Editors the Paste command was not available. This has been fixed.
	SDL#215	Explorer/validator uses double licenses when starting with tau -fg	On UNIX, if you start SDL suite with "-fg", e.g. "sdlsuite -fg" (to keep the program in the foreground) and then start the SDL Explorer UI and open the SDL Explorer binary it happened that two licenses are checked out. This has now been fixed such that only one license is used.
58916,SGC,724	TLOG#51136	Support for SDL suite and code generator on 64 bit Linux platforms	Support for 64bit Linux has been added to SDL Suite. All exes (both the tool itself as well as the generated code) are in 32-bit mode, so generated code is compiled using the 32bit flag.
71047,019,866	TLOG#52257	Entity class name identifiers for structures.	When the same name is used for the field in two different choice types, it leads to name clash in #SDL(name_of_choice_field) reference and result in incorrect system behavior. This problem has been fixed. #SDL(name_of_choice_field) may reference literals from implicit <choice type name>present type in target code which are used to check presence of choice fields. In addition to the name clash between different choice types, there is also name clash between choice field and implicit literal from implicit <choice type name>present type. To avoid these name clashes, the ability to qualify literals from implicit <choice type name>present type has been added, for example: #SDL(<<PACKAGE Pac/TYPE ChoiceT/TYPE present>>name_of_choice_field), where "TYPE present" denotes implicit ChoiceTpresent type generated for ChoiceT. Qualifier facility in #SDL directive has also been improved with ability to use FIELD as entity class qualifier, which allows to point to a type in some structure or choice field. This is useful for inline types translated from ASN.1 (they get name with INLINE_<number> postfix where the number may change if ASN.1 specification is updated). For example, for the following ASN.1 type: FrequencyInfo1 ::= SEQUENCE { modeSpecificInfo CHOICE { fdd INTEGER, tdd INTEGER } } choice type is defined inline and does not have a name. It will be translated to the following in SDL: newtype FrequencyInfo1_INLINE_0 /#SYNT/ choice fdd Integer; tdd Integer; endnewtype; newtype FrequencyInfo1 struct modeSpecificInfo FrequencyInfo1_INLINE_0; endnewtype; It is possible to use the name of the structure field to denote inline choice type and reference <choice type>present literals like this: #(<<PACKAGE MyDefs/TYPE FrequencyInfo1/FIELD modeSpecificInfo/TYPE present>>tdd)
77948,019,866	TLOG#54781	Not possible to add parameters in redefined Process Type, but no error or warning for the redefinition	It is not allowed to add formal parameters in redefined/finalized process type, but no error or warning message is printed when formal parameters are defined there. This problem has been fixed and now "ERROR 356 Formal parameter not allowed in redefined or finalized definition" is printed for redefined or finalized process type with formal parameters.
53637,999,866	TLOG#55130	Need elaborate description on the steps to build & run light integration.	The documentation has been updated
51698,999,866	TLOG#55131	Mismatch of the description and the snapshots in the help manual	In the SDL and TTCN Suite online help, in the section on Integration with Operating Systems some figures are shown from the Solaris platform but the description is aimed for the Windows platform. This has been fixed by updating the figures.
53636,999,866	TLOG#55132	Description of typedef of a structure is not syntactically correct in help	The documentation has been updated
53639,999,866	TLOG#55158	Code snippets of xInEnv, xOutEnv Function are not correct.	The documentation has been updated

What’s new in 6.3.0.0 IFix 1

No major new functionality has been added to this release.

Call Ticket	Internal number	Synopsis	Release Notes Text
2091643	TLOG#47144	Conflicts during compilation of Telelogic ASN.1 codecs	It has not been possible to automatically add custom prefixes or suffixes to the symbol names in the code generated out of ASN.1 modules. This is fixed in SDL Suite 6.3.0.0-if1. A new option is available in asn1util and in the Make dialogs in the Organizer and the Targeting Expert. In the generated ASN.1 coder structures a specified prefix is added after the standard yASN1_ prefix, for example: CHOICE_TYPE_DECL(EXTERN_INFO,yASN1_MyPrefix_NetworkAddress); CHOICE_TYPE_DEF(GLOBAL_INFO,yASN1_MyPrefix_NetworkAddress,EXTMARKER_ABSENT,NONE_EXTMARKER, ... );
4056461	TLOG#47820	Faulty/unclear message when trying to install SDL-Suite in Program Files, Vista.	Now a check is performed during installation that there is no space in the installation path.
61079,019,866	TLOG#49961	Missing SDT-SDL-Coder License feature results in compilation error in Linux	When the SDT-SDL-Coder license FEATURE is missing and the Targeting Expert tries to build a system using SDL coder functions there was no error message shown indicating the missing license. This is fixed in 6.3.0.1.
61933,019,866	TLOG#50439	SDL suite should support calling of macro through ‘macro’ keyword.	SDL Suite has been updated to allow macro calling through 'macro' keyword in task symbols. Textual macrodefinition can be inserted into any task symbol, it can contain only statements that are allowed for the task symbol (for example, x := x + 1;). Macros can be called through the 'macro' keyword inside text symbols.
78494,999,724	TLOG#51564	Is a length check performed on the data held by the parameter of the (PER) DECODE function.	A potantial problem in PERDecodePrimBIT_STRING function may lead to a crash during PER Decode. Crash can happen when the buffer is broken or truncated and decoded length of the bit string is greater than the actual bit string available in the buffer, or when user append function is used to read another portion of data to decode. This problem has been fixed.
68650,999,744	TLOG#51695	The "Simulate" Shortcut icon doesnot consider the Selected Standard Kenrel in Make Dialogue	On Windows the "Simulate" Shortcut icon in the Organizer did not consider the Simulation Kernel that was last selected in the Make dialog. It always chose the Simulation Kernel. This is fixed in 6.3.1.
42490,999,672	TLOG#51740	GciSnapshot function not called correctly	Now it is possible to use configuration with MTC component only.
72037,019,866	TLOG#52254	A variation is observed in the results of the Simulator UI command ‘Output-To’ and ‘Output-Via’.	When using the Simulator with a system supporting signal priorities, sending a signal with the command "Output-To" would not deliver it to its receiver. This has now been fixed.
72034,019,866	TLOG#52255	Wrong signal names in generated code for remote procedure calls lead to compile and link error.	When using Targeting Expert to generate a threaded system with remote procedure calls, the signals used for the remote procedure calls would get their names wrong in the generated code, leading to compile and link errors. This has now been fixed.
71047,019,866	TLOG#52257	Entity class name identifiers for structures.	When the same name is used for the field in two different choice types, it leads to name clash in #SDL(name_of_choice_field) reference and result in incorrect system behavior. This problem has been fixed. #SDL(name_of_choice_field) may reference literals from implicit <choice type name>present type in target code which are used to check presence of choice fields. In addition to the name clash between different choice types, there is also name clash between choice field and implicit literal from implicit <choice type name>present type. To avoid these name clashes, the ability to qualify literals from implicit <choice type name>present type has been added, for example: #SDL(<<PACKAGE Pac/TYPE ChoiceT/TYPE present>>name_of_choice_field), where "TYPE present" denotes implicit ChoiceTpresent type generated for ChoiceT. Qualifier facility in #SDL directive has also been improved with ability to use FIELD as entity class qualifier, which allows to point to a type in some structure or choice field. This is useful for inline types translated from ASN.1 (they get name with INLINE_<number> postfix where the number may change if ASN.1 specification is updated). For example, for the following ASN.1 type: FrequencyInfo1 ::= SEQUENCE { modeSpecificInfo CHOICE { fdd INTEGER, tdd INTEGER } } choice type is defined inline and does not have a name. It will be translated to the following in SDL: newtype FrequencyInfo1_INLINE_0 /#SYNT/ choice fdd Integer; tdd Integer; endnewtype; newtype FrequencyInfo1 struct modeSpecificInfo FrequencyInfo1_INLINE_0; endnewtype; It is possible to use the name of the structure field to denote inline choice type and reference <choice type>present literals like this: #(<<PACKAGE MyDefs/TYPE FrequencyInfo1/FIELD modeSpecificInfo/TYPE present>>tdd)
72039,019,866	TLOG#52302	Variation in the generated code w.r.t XTRACE when compared with SDL Suite 4.4 and 6.3 which leads to compilation failure.	Decision statements with argument of the same type in base and derived process types may result in the following compile error message: error: structure has no member named `yDcn_somename' The error occurs when decision in the base process type is simple (i.e. contains one branch with one case value, and one else branch), while decision in derived process type is not simple. This problem has been fixed.

What’s new in 6.3

No major new functionality has been added to this release.

Problems solved in IBM Rational SDL and TTCN Suite 6.3

Call Ticket	Internal number	Synopsis	Release Notes Text
5018585	TLOG#32722	experiencing some problems with abbreviation facility included with simulator	Faulty error message "Name was ambiguous" for similar enum literals, like SCH_HD, SCH_HM, SCH_H (one literal name is a substring of some other literal names), has been fixed.
7020638	TLOG#36084	Capitalization in SDL Make	Compile errors for Lower case capitalization mode with ctypes package have been fixed. Messages like "ctypes.c(54) : error C2065: 'type_SDL_shortint' : undeclared identifier" are not printed any more.
4051741	TLOG#41345	How to get past redeclaration of global_namespace?	"Illegal redeclaration of name global_namespace" error that appeared when using several import specifications in one system has been fixed. Now, CPP2SDL tool appends the name of import specification to the name "global_namespace".
7029627	TLOG#44439	Problem to print PS files	When printing to Postscript files on Linux it can happen that the generated Postscript is not correct. The problem can appear when using tools to convert Postscript to pdf and the converter complains because fontnames are missing. This problem has been seen when using locales having UTF-8 fonts. This has been fixed in 6.3.0.
3041982	TLOG#45342	Support for Visual Studio 2008 for SDL Suite	IBM Rational SDL and TTCN Suite now supports Visual Studio 2008
3042046	TLOG#45378	Defect in the Help Manual regarding the supported compilers for Windows Vista	The problem in the user documentation has now been corrected.
3043229	TLOG#46610	Crash during co-simulation from batch mode (command line)	Crash when co-simulate executable built by VC8 in batch mode was fixed.
02971,140,702	TLOG#49543	Error : ERROR 261 Answers are not mutually exclusive	SDL Analyzer treated external synonyms without values as equal (for example, SYNONYM X Integer = EXTERNAL;) and if two or more external synonyms were used as decision answers, "ERROR 261 Answers are not mutually exclusive" was reported.
3041489	TLOG#44886	Unable to Generate Cextreme Code from Commandline using sdtbatch	Now it is possible to generate CExtreme code with the sdtbatch command by specifying options file in the command line.

U.S. Government Users Restricted Rights: Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.