Interim fix ELM_703_iFix001.zip This interim fix is only valid for the IBM solution for Engineering Lifecycle Management (ELM) 703 release. Future 7.0.3 iFixes will include these fixes, as will the next release of the IBM solution for ELM. CONTENTS OF THE INTERIM FIX 1. This readme file: readme.txt 2. Server patch file: ELM_server_patch_7.0.3.0-iFix001-ELM703M-I20231124-1536.zip (see the SERVER PATCH INSTRUCTIONS section) 3. Jazz Reporting Service (Report Builder) patch file: rs.war (see the JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS section) 4. Lifecycle Query Engine patch file: lqe.war (see the LIFECYCLE QUERY ENGINE AND LINK INDEX PROVIDER INSTRUCTIONS section) 5. Link Index Provider patch file: ldx.war (see the LIFECYCLE QUERY ENGINE AND LINK INDEX PROVIDER INSTRUCTIONS section) 6. IBM Engineering Workflow Management Client for Eclipse update site: UpdateSiteFor_7.0.3.0-iFix001-ELM703M-I20231124-1536.zip (see the IBM ENGINEERING WORKFLOW MANAGEMENT CLIENT FOR ECLIPSE UPDATE SITE INSTRUCTIONS section) In addition to the fixes listed in this readme file, the interim fix might also contain fixes for security issues. For details, see the IBM Product Security Incident Response Blog: https://www.ibm.com/blogs/psirt/ CONTENTS OF THIS FILE 1. SERVER PATCH INSTRUCTIONS 2. JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS 3. LIFECYCLE QUERY ENGINE AND LINK INDEX PROVIDER INSTRUCTIONS 4. IBM ENGINEERING WORKFLOW MANAGEMENT CLIENT FOR ECLIPSE UPDATE SITE INSTRUCTIONS 5. NEW APAR FIXES IN THIS IFIX 6. ADDITIONAL FIXES INSTRUCTIONS 7. CONSOLIDATED LIST OF APAR FIXES 8. CLIENT APAR FIXES 9. NEW FEATURES & IMPROVEMENTS 10. KNOWN ISSUES 1. SERVER PATCH INSTRUCTIONS Note: -The ELM server patch file, ELM_server_patch_7.0.3.0-iFix001-ELM703M-I20231124-1536.zip, might contain fixes for either a subset or all of these applications: Jazz Team Server, IBM Engineering Workflow Management, IBM Engineering Test Management, IBM Engineering Requirements Management DOORS Next, IBM Engineering Systems Design Rhapsody - Model Manager, IBM Engineering Lifecycle Optimization Engineering Insights. For the list of APARs that were fixed, listed by application, see the APAR FIXES section. -Before you install the server patch file, ELM_server_patch_7.0.3.0-iFix001-ELM703M-I20231124-1536.zip, verify that no other test fixes or hot fixes are installed. If other fixes are installed, contact IBM Software Support. -For an ELM deployment on a single server, complete the following steps once. For a distributed ELM deployment, complete the same steps on each server. To install the server patch: a. Stop the ELM server. b. Verify whether the following directory exists: /server/patch. -If the directory exists, back up and then remove its contents. -If the directory does not exist, create it. c. Copy the server patch file, ELM_server_patch_7.0.3.0-iFix001-ELM703M-I20231124-1536.zip, into the /server/patch directory. d. Clear the application server cache. For instructions on clearing the cache, consult the application server's detailed documentation. For instructions on what to remove, see the "To clear the application cache on WebSphere Liberty Server" section in this file. e. Start the ELM server. f. Run repotools- -clean for each application that is installed to clear the repotools cache. Note: This will also display the help output. For instance: - repotools-ccm -clean - repotools-gc -clean - repotools-jts -clean - repotools-qm -clean - repotools-relm -clean - repotools-rm -clean - repotools-dcc -clean g. Check the ADDITIONAL FIXES INSTRUCTIONS section for additional steps that may be needed for a specific APAR Note: For a distributed ELM deployment, complete the same steps on each server. To uninstall the server patch: a. Stop the ELM server. b. Back up and then remove the contents of the following directory: /server/patch c. Clear the application server cache. For instructions on clearing the cache, consult the application server's detailed documentation. For instructions on what to remove, see the "To clear the application cache on WebSphere Liberty Server" section in this file. d. Start the ELM server. e. Run repotools- -clean for each application that is installed. Note: This will also display the help output. For instance: - repotools-ccm -clean - repotools-gc -clean - repotools-jts -clean - repotools-qm -clean - repotools-relm -clean - repotools-rm -clean - repotools-dcc -clean To clear the application cache on WebSphere Liberty Server: We have not identified the need to clear any cache in WebSphere Liberty Server To validate that the server patch was successfully installed or uninstalled: a. After the server starts, open an ELM application. b. Click Help > About the Server. c. In the Build Information section, review the interim fix information to confirm that it is either installed (listed) or uninstalled (not listed). 2. JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS To install the patch with Jazz Reporting Service (Report Builder) deployed on WebSphere Liberty Server: a. Rename the new rs.war file as rs.war.zip. b. Stop the WebSphere Liberty Server for the Jazz Reporting Service. c. Back up the following file in case you need to revert the patch: \server\liberty\servers\clm\apps\rs.war.zip d. Delete the following files: \server\liberty\servers\clm\apps\rs.war.zip \server\liberty\clmServerTemplate\apps\rs.war.zip e. Delete the following directories: \server\liberty\servers\clm\apps\rs.war \server\liberty\clmServerTemplate\apps\rs.war f. Place the new rs.war.zip file in the following directories: \server\liberty\servers\clm\apps \server\liberty\clmServerTemplate\apps g. Unzip the new rs.war.zip file into the following directories: \server\liberty\servers\clm\apps\rs.war \server\liberty\clmServerTemplate\apps\rs.war h. Start the server. To uninstall the patch with Jazz Reporting Service (Report Builder) deployed on WebSphere Liberty Server: a. Stop the WebSphere Liberty Server for the Jazz Reporting Service. b. Restore the original rs.war.zip file that was backed up during the installation to the following directories: \server\liberty\servers\clm\apps \server\liberty\clmServerTemplate\apps c. Delete the following directories: \server\liberty\servers\clm\apps\rs.war \server\liberty\clmServerTemplate\apps\rs.war d. Unzip the original rs.war.zip file into the following directories: \server\liberty\servers\clm\apps\rs.war \server\liberty\clmServerTemplate\apps\rs.war e. Start the server. To verify that the patch was successfully installed: a. After the server starts, open the Jazz Reporting Service home page. b. Click the question mark icon near the upper right. c. Select About Jazz Reporting Service. d. Check that the build ID in the dialog box is JRS_7.0.3-I20231124-1408 3. LIFECYCLE QUERY ENGINE AND LINK INDEX PROVIDER INSTRUCTIONS If this is a new installation, a backup is not needed. Otherwise, be sure you have a backup before you install this interim fix. For details, see "Backing up and restoring Lifecycle Query Engine": https://www.ibm.com/docs/en/elms/elm/7.0.3?topic=performance-backing-up-restoring-lqe-ldx To install the patch with Lifecycle Query Engine or Link Index Provider deployed on WebSphere Liberty Server: a. Rename the new lqe.war or ldx.war file as lqe.war.zip or ldx.war.zip. b. Stop the WebSphere Liberty Server for the Lifecycle Query Engine or Link Index Provider. c. Back up the following file in case you need to revert the patch: \server\liberty\servers\clm\apps\lqe.war.zip or \server\liberty\servers\clm\apps\ldx.war.zip d. Delete the following files: \server\liberty\servers\clm\apps\lqe.war.zip \server\liberty\clmServerTemplate\apps\lqe.war.zip or \server\liberty\servers\clm\apps\ldx.war.zip \server\liberty\clmServerTemplate\apps\ldx.war.zip e. Delete the following directories: \server\liberty\servers\clm\apps\lqe.war \server\liberty\clmServerTemplate\apps\lqe.war or \server\liberty\servers\clm\apps\ldx.war \server\liberty\clmServerTemplate\apps\ldx.war f. Place the new lqe.war.zip or ldx.war.zip file in the following directories: \server\liberty\servers\clm\apps \server\liberty\clmServerTemplate\apps or \server\liberty\servers\clm\apps \server\liberty\clmServerTemplate\apps g. Unzip the new lqe.war.zip or ldx.war.zip file into the following directories: \server\liberty\servers\clm\apps\lqe.war \server\liberty\clmServerTemplate\apps\lqe.war or \server\liberty\servers\clm\apps\ldx.war \server\liberty\clmServerTemplate\apps\ldx.war h. Start the server. To uninstall the patch with Lifecycle Query Engine or Link Index Provider deployed on WebSphere Liberty Server: a. Stop the WebSphere Liberty Server for the Lifecycle Query Engine or Link Index Provider. b. Restore the original lqe.war.zip or ldx.war.zip file that was backed up during the installation to the following directories: \server\liberty\servers\clm\apps \server\liberty\clmServerTemplate\apps or \server\liberty\servers\clm\apps \server\liberty\clmServerTemplate\apps c. Delete the following directories: \server\liberty\servers\clm\apps\lqe.war \server\liberty\clmServerTemplate\apps\lqe.war or \server\liberty\servers\clm\apps\ldx.war \server\liberty\clmServerTemplate\apps\ldx.war d. Unzip the original rs.war.zip file into the following directories: \server\liberty\servers\clm\apps\lqe.war \server\liberty\clmServerTemplate\apps\lqe.war or \server\liberty\servers\clm\apps\ldx.war \server\liberty\clmServerTemplate\apps\ldx.war e. Start the server. To verify that the patch was successfully installed: a. After the server starts, open the Lifecycle Query Engine or Link Index Provider home page. b. Verify that the build ID in the upper right matches LQE_7.0.3-I20231124-1224. After installing the patch: a. The Lifecycle Query Engine or Link Index Provider automatically detects whether it is necessary to migrate data from an existing instance. If data migration is necessary, a Start Migration button is displayed on the main Lifecycle Query Engine or Link Index Provider page: https:///lqe/web/admin/data-sources or https:///lqe/web/admin/data-sources. If the button is displayed, click Start Migration. b. Reindex the data sources as required. 4. IBM ENGINEERING WORKFLOW MANAGEMENT CLIENT FOR ECLIPSE UPDATE SITE INSTRUCTIONS To install the client update site: NOTE: When going through the installation steps, if no features are listed, uncheck the "Group items by category" check box. a. Extract the update site file to the computer where the client is installed. b. In the IBM Engineering Workflow Management client, click Help > Install New Software. c. In the Install window, click Add. d. In the Add Repository window, click Local and navigate to the extracted update site file. The update site root directory contains a site.xml file. e. Select the patches to install. f. If you agree to the terms, accept the license agreement and click Install. g. After the installation is complete, restart the IBM Engineering Workflow Management client. To update the feature patch, you can install the new version directly over an old patch. You do not have to uninstall the old patch. To uninstall the client update site: a. In the IBM Engineering Workflow Management client, click Help > About IBM Engineering Workflow Management > Installation Details. b. Select the patches to uninstall and click Uninstall. c. After the uninstall process is complete, restart the IBM Engineering Workflow Management client. WARNING: -If you run the uninstall process on an IBM Engineering Workflow Management client that was installed by using a .zip file, the feature patch will be removed along with the original feature. Removing the patch breaks the functionality of the affected feature. For a client that was installed by using a .zip file, reinstall the features by downloading the IBM Engineering Workflow Management p2 repository from Jazz.net, and use the same installation steps with the following exception. For step d, click Archive and select the p2 repository .zip file and install the IBM Engineering Workflow Management feature. This step removes the patched plug-ins and replaces the missing features with the original versions of the feature from the p2 repository. -If you run the uninstall process on an IBM Engineering Workflow Management client that was installed by using the p2 repository, to remove the patch, you must uninstall the entire IBM Engineering Workflow Management p2 feature and then reinstall the entire IBM Engineering Workflow Management feature through the p2 repository. 5. NEW APAR FIXES IN THIS IFIX +-- Jazz Reporting Service [APAR PH57792] [missing right parenthesis for SQL in some cases if Data completeness check is enabled] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569866] [APAR PH57792] [Error message shows incorrect no of reports in folders while deleting the folder by other user] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570028] [APAR PH57792] [Report Builder should prevent NPE during type system fetch from Web UI] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569869] [APAR PH57792] [Exporting a report to Excel fails with 400 Bad Request] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569665] [APAR PH57792] [rs compact not working] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569591] [APAR PH57792] [Report Builder should handle trends with no IDs and log a warning instead of throwing an NPE] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569868] [APAR PH57792] [Run report shows blank screen for DS: LQE with Config] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570279] [APAR PH57792] [Importing ready-to-use reports does not work] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569870] [APAR PH57792] [Schedules page size not retained on schedule edit] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569991] [APAR PH57792] [Intermittent issue observed during navigate back to report screen after export report to excel/word, pdf, html screen] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569589] [APAR PH57051] [New additional LQE2 instance added to existing ELM configuration does not create Datasource in JRS] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569269] [APAR PH57792] [JSON Server response is shown in the login screen] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569982] [APAR PH57792] [Strange behaviour after moving multiple reports] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570052] [APAR PH57189] [After running a compaction for JRS, the Swedish characters are replaced by the question mark like character in report names, descriptions, folder names and values for conditions.] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569306] +-- Lifecycle Query Engine [APAR PH57792] [Newly created collection stucks in Failed patches after SGC Sample creation for LQE RS (SQL type report) due to invalid eTag] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570168] [APAR PH57792] [LQE heap trigger for query shedding should not use totalHeap from the memory MBean] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569981] +-- IBM Rhapsody Model Manager [APAR PH57792] [BVT scenario is failing at deploy sample model step in opt-in and opt-out mode] [https://jazz.net/jazz04/resource/itemName/com.ibm.team.workitem.WorkItem/80544] +-- IBM Engineering Lifecycle Optimization - Engineering Insights [APAR PH57792] [Getting internal server error after certain idle time and also when log-out from ENI and Log-in using different User.] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569916] [APAR PH57792] [Action Icon does not load when custom context root is used in ENI] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569679] [APAR PH57792] [Change artifact type on Requirement artifact type not having correct option] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570163] [APAR PH57792] [Artifact Picker dialog displays HTML tags in Title and Description of the artifact] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570194] [APAR PH57792] [Queries->Search display tag in string below textbox] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569593] [APAR PH57792] [In case of "Auto" value of link directions, links arrows are not rendered properly.] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570191] [APAR PH57792] [Correct percent is not retained when you select Show percent to Show artifact and again to Show percent] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569754] +-- IBM Engineering Requirements Management DOORS Next [APAR PH50978] [CSV Import fails if an artifact exists in the same GC but different local configuration (inconsistent behavior)] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146329] [APAR PH57327] [DNG Removes Link to Approved Test Case from Requirement but Leaves Link on Test Case] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146154] [APAR PH57449] [Diagram shows html tags (
, , ) in the artifact View] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146224] [APAR PH50540] [Excluding baselines from the TRS feed can affect LDX functionality for those baselines] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146146] [APAR PH56929] [Compare can fail due to an ArrayStoreException] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146087] [APAR PH57100] [ReqIF Import is slow in large components] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146185] [APAR PH56944] [Reqif import does not update artifacts that are already imported into dnext] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146244] [APAR PH57387] [Artifacts being locked after changing the source configuration] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146221] [APAR PH57792] [Skipped TRS selections are not recorded in the DNext skipped resources section] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146297] [APAR PH56298] [Modules are not assigned with default workflow state values, upon importing component templates that includes Module template.] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146184] [APAR PH57797] [TRS Validation data collector spliterator does not get split properly for configurations] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146320] [APAR PH57792] [Edit Links: To edit links from the side panel always require refresh to reflect Link Type] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146232] [APAR PH56478] [DB2: Slow query on Link Exists views with enum filters with large numbers of opt-out projects] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146209] +-- Jazz Foundation [APAR PH56988] [Validity TRS feed changelog feed can sometimes fail] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569041] [APAR PH57792] [Help links in the web UI are broken for JAF based products] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569875] [APAR PH57792] [URL is missing in the OpenSocial Gadget dialog from work item dashboard widget] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569715] [APAR PH57792] [DB2: Slow SQL query in VersionTable.getCurrentItemChanges and getCurrentItemChanges2] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/568941] [APAR PH57792] [Test Failure (RJF-Repository-T20231010-0043): com.ibm.team.repository.server.jts.tests.license.SigningRulesJarReaderTest.testSimple] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569718] [APAR PH57792] [Test Failure (RJF-Derby-T20230918-1311): com.ibm.team.repository.service.tests.license.LicenseServiceTests.test001_GetDefaultLicenseId1] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569654] [APAR PH57621, PH58536] [Unable to restore an archived personal GC with component overlap in it] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569977] +-- Engineering Test Management [APAR PH57792] [Error encountered when attempting to execute a TCER located in a different component from the dashboard] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194713] [APAR PH57792] [TRS Validation fails with discrepancies for build records and build definitions] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194968] [APAR PH57792] [There is no warning when moving a predefined section from "selected" to "available" will lose the rich text data.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194704] [APAR PH55016] [Perform Discovery > Run permission required to run multiple TCERs from a test plan] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194699] [APAR PH57137] ["Run a test script" option doesn’t work as expected.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194694] [APAR PH56854] [Validation of QM resources on SVT federated prod line N environment is showing missing artifacts in the feed.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194797] [APAR PH57792] [Duplication of testcase creates multiple testcases instead of single duplicated testcase] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194680] [APAR PH57792] [[Follow Up 194244] - TCER after changing test scripts have issues in CSV & filters.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194869] [APAR PH57792] [ETM Performance - Active service : QM Migration service running since last 16 days "com.ibm.rqm.oslc.migration.OslcMigrationStatusService.migrateFromVersion" in 7.0.3] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194796] [APAR PH57792] [Recently Viewed tab shows multiple entries for a single artifact view] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194703] [APAR PH56392] [A blank page is displayed while logging into an ETM project area if the user preferences get corrupted for any reason] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194800] [APAR PH57792] [DCC ETL fails fetching execution results] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194878] [APAR PH57792] [Test case's title include html formatting for generated TCs] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194714] [APAR PH57792] [Traceability view in the Test Case Execution Records section on a test case does not display any TCERs] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194706] [APAR PH57792] [Hierarchical category does not show parent selection in list/table view] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194710] [APAR PH57069] [Running a TSER from the editor appears to be taking the wrong timeline] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194696] [APAR PH57216] [FOP NPE when calling getRendererConfiguration to export a PDF] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194716] [APAR PH57268] [Running a Reportable Rest API call with oslc_config.context takes extra time] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194799] [APAR PH57142] [Default test script state is incorrect when created by the ETM Reportable REST API.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194668] [APAR PH57792] [DeliverETM Excel/Word Importer: Changing CustomAttribute value from ExcelImporter Run Offline fails.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194712] [APAR PH57792] [Unsupported test script types can be selected for suite execution] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194708] +-- IBM Engineering Workflow Management [APAR PH57792] [Exception occurred during change event processing for TRS feed] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569877] [APAR PH57792] [Error raised when saving subset after remove action] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570276] [APAR PH57792] [ISPF Interactive Gateway : Two undocumented properties are being fetched from the wrong place] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570281] [APAR PH57792] [Review Ant task help system for 7.0.3 updates] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570315] [APAR PH57792] [Error message is not display while linking a work item to an approved test case] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569742] [APAR PH57792] [Saving matter after dragging and dropping a subset into another subset] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570278] [APAR PH55902] [Creating a query with a work item list attribute fails to run] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569944] [APAR PH57792] [Inconsistent error when creating a subset with dynamic criteria] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570280] 6. ADDITIONAL FIXES INSTRUCTIONS +-- Product Jazz Reporting Service [APAR PH57051] [New additional LQE2 instance added to existing ELM configuration does not create Datasource in JRS] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569269] This defect requires additional steps to apply: See the JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS section. ---- [APAR PH57189] [After running a compaction for JRS, the Swedish characters are replaced by the question mark like character in report names, descriptions, folder names and values for conditions.] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569306] This defect requires additional steps to apply: See the JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS section. ---- [APAR PH57792] [Error message shows incorrect no of reports in folders while deleting the folder by other user] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570028] This defect requires additional steps to apply: See the JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS section. ---- [APAR PH57792] [Exporting a report to Excel fails with 400 Bad Request] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569665] This defect requires additional steps to apply: See the JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS section. ---- [APAR PH57792] [Intermittent issue observed during navigate back to report screen after export report to excel/word, pdf, html screen] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569589] This defect requires additional steps to apply: See the JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS section. ---- [APAR PH57792] [JSON Server response is shown in the login screen] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569982] This defect requires additional steps to apply: See the JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS section. ---- [APAR PH57792] [Run report shows blank screen for DS: LQE with Config] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570279] This defect requires additional steps to apply: See the JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS section. ---- [APAR PH57792] [Strange behaviour after moving multiple reports] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570052] This defect requires additional steps to apply: See the JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS section. ---- [APAR PH57792] [rs compact not working] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569591] This defect requires additional steps to apply: See the JAZZ REPORTING SERVICE (REPORT BUILDER) INSTRUCTIONS section. ---- +-- Product Lifecycle Query Engine [APAR PH57792] [LQE heap trigger for query shedding should not use totalHeap from the memory MBean] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569981] This defect requires additional steps to apply: see the LIFECYCLE QUERY ENGINE AND LINK INDEX PROVIDER INSTRUCTIONS section ---- [APAR PH57792] [Newly created collection stucks in Failed patches after SGC Sample creation for LQE RS (SQL type report) due to invalid eTag] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570168] This defect requires additional steps to apply: see the LIFECYCLE QUERY ENGINE AND LINK INDEX PROVIDER INSTRUCTIONS section ---- +-- Product Jazz Foundation [APAR PH57792] [Help links in the web UI are broken for JAF based products] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569875] This defect requires additional steps to apply: To enable the fix, the following would need to be present in the services.xml ---- +-- Product Engineering Test Management [APAR PH57792] [DeliverETM Excel/Word Importer: Changing CustomAttribute value from ExcelImporter Run Offline fails.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194712] This defect requires additional steps to apply: As Defect fix is in ExcelWordImporter tool, To get this Defect Fix, You'll have to request for a newer version of ExcelWordImporter via IBM support request. ---- 7. CONSOLIDATED LIST OF APAR FIXES This interim fix contains fixes for the following APARs: [APAR ID] [Maintenance Item Summary] [Maintenance Item URL] +-- Product Jazz Reporting Service [APAR PH57051] [New additional LQE2 instance added to existing ELM configuration does not create Datasource in JRS] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569269] [APAR PH57189] [After running a compaction for JRS, the Swedish characters are replaced by the question mark like character in report names, descriptions, folder names and values for conditions.] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569306] [APAR PH57792] [Error message shows incorrect no of reports in folders while deleting the folder by other user] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570028] [APAR PH57792] [Exporting a report to Excel fails with 400 Bad Request] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569665] [APAR PH57792] [Importing ready-to-use reports does not work] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569870] [APAR PH57792] [Intermittent issue observed during navigate back to report screen after export report to excel/word, pdf, html screen] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569589] [APAR PH57792] [JSON Server response is shown in the login screen] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569982] [APAR PH57792] [Report Builder should handle trends with no IDs and log a warning instead of throwing an NPE] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569868] [APAR PH57792] [Report Builder should prevent NPE during type system fetch from Web UI] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569869] [APAR PH57792] [Run report shows blank screen for DS: LQE with Config] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570279] [APAR PH57792] [Schedules page size not retained on schedule edit] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569991] [APAR PH57792] [Strange behaviour after moving multiple reports] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570052] [APAR PH57792] [missing right parenthesis for SQL in some cases if Data completeness check is enabled] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569866] [APAR PH57792] [rs compact not working] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569591] +-- Product Lifecycle Query Engine [APAR PH57792] [LQE heap trigger for query shedding should not use totalHeap from the memory MBean] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569981] [APAR PH57792] [Newly created collection stucks in Failed patches after SGC Sample creation for LQE RS (SQL type report) due to invalid eTag] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570168] +-- Product IBM Rhapsody Model Manager [APAR PH57792] [BVT scenario is failing at deploy sample model step in opt-in and opt-out mode] [https://jazz.net/jazz04/resource/itemName/com.ibm.team.workitem.WorkItem/80544] +-- Product IBM Engineering Lifecycle Optimization - Engineering Insights [APAR PH57792] [Action Icon does not load when custom context root is used in ENI] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569679] [APAR PH57792] [Artifact Picker dialog displays HTML tags in Title and Description of the artifact] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570194] [APAR PH57792] [Change artifact type on Requirement artifact type not having correct option] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570163] [APAR PH57792] [Correct percent is not retained when you select Show percent to Show artifact and again to Show percent] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569754] [APAR PH57792] [Getting internal server error after certain idle time and also when log-out from ENI and Log-in using different User.] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569916] [APAR PH57792] [In case of "Auto" value of link directions, links arrows are not rendered properly.] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570191] [APAR PH57792] [Queries->Search display tag in string below textbox] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569593] +-- Product IBM Engineering Requirements Management DOORS Next [APAR PH50540] [Excluding baselines from the TRS feed can affect LDX functionality for those baselines] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146146] [APAR PH50978] [CSV Import fails if an artifact exists in the same GC but different local configuration (inconsistent behavior)] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146329] [APAR PH56298] [Modules are not assigned with default workflow state values, upon importing component templates that includes Module template.] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146184] [APAR PH56478] [DB2: Slow query on Link Exists views with enum filters with large numbers of opt-out projects] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146209] [APAR PH56929] [Compare can fail due to an ArrayStoreException] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146087] [APAR PH56944] [Reqif import does not update artifacts that are already imported into dnext] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146244] [APAR PH57100] [ReqIF Import is slow in large components] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146185] [APAR PH57327] [DNG Removes Link to Approved Test Case from Requirement but Leaves Link on Test Case] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146154] [APAR PH57387] [Artifacts being locked after changing the source configuration] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146221] [APAR PH57449] [Diagram shows html tags (
, , ) in the artifact View] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146224] [APAR PH57792] [Edit Links: To edit links from the side panel always require refresh to reflect Link Type] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146232] [APAR PH57792] [Skipped TRS selections are not recorded in the DNext skipped resources section] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146297] [APAR PH57797] [TRS Validation data collector spliterator does not get split properly for configurations] [https://jazz.net/jazz03/resource/itemName/com.ibm.team.workitem.WorkItem/146320] +-- Product Jazz Foundation [APAR PH56988] [Validity TRS feed changelog feed can sometimes fail] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569041] [APAR PH57621, PH58536] [Unable to restore an archived personal GC with component overlap in it] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569977] [APAR PH57792] [DB2: Slow SQL query in VersionTable.getCurrentItemChanges and getCurrentItemChanges2] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/568941] [APAR PH57792] [Help links in the web UI are broken for JAF based products] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569875] [APAR PH57792] [Test Failure (RJF-Derby-T20230918-1311): com.ibm.team.repository.service.tests.license.LicenseServiceTests.test001_GetDefaultLicenseId1] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569654] [APAR PH57792] [Test Failure (RJF-Repository-T20231010-0043): com.ibm.team.repository.server.jts.tests.license.SigningRulesJarReaderTest.testSimple] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569718] [APAR PH57792] [URL is missing in the OpenSocial Gadget dialog from work item dashboard widget] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569715] +-- Product Engineering Test Management [APAR PH55016] [Perform Discovery > Run permission required to run multiple TCERs from a test plan] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194699] [APAR PH56392] [A blank page is displayed while logging into an ETM project area if the user preferences get corrupted for any reason] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194800] [APAR PH56854] [Validation of QM resources on SVT federated prod line N environment is showing missing artifacts in the feed.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194797] [APAR PH57069] [Running a TSER from the editor appears to be taking the wrong timeline] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194696] [APAR PH57137] ["Run a test script" option doesn’t work as expected.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194694] [APAR PH57142] [Default test script state is incorrect when created by the ETM Reportable REST API.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194668] [APAR PH57216] [FOP NPE when calling getRendererConfiguration to export a PDF] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194716] [APAR PH57268] [Running a Reportable Rest API call with oslc_config.context takes extra time] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194799] [APAR PH57792] [DCC ETL fails fetching execution results] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194878] [APAR PH57792] [DeliverETM Excel/Word Importer: Changing CustomAttribute value from ExcelImporter Run Offline fails.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194712] [APAR PH57792] [Duplication of testcase creates multiple testcases instead of single duplicated testcase] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194680] [APAR PH57792] [ETM Performance - Active service : QM Migration service running since last 16 days "com.ibm.rqm.oslc.migration.OslcMigrationStatusService.migrateFromVersion" in 7.0.3] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194796] [APAR PH57792] [Error encountered when attempting to execute a TCER located in a different component from the dashboard] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194713] [APAR PH57792] [Hierarchical category does not show parent selection in list/table view] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194710] [APAR PH57792] [Recently Viewed tab shows multiple entries for a single artifact view] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194703] [APAR PH57792] [TRS Validation fails with discrepancies for build records and build definitions] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194968] [APAR PH57792] [Test case's title include html formatting for generated TCs] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194714] [APAR PH57792] [There is no warning when moving a predefined section from "selected" to "available" will lose the rich text data.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194704] [APAR PH57792] [Traceability view in the Test Case Execution Records section on a test case does not display any TCERs] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194706] [APAR PH57792] [Unsupported test script types can be selected for suite execution] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194708] [APAR PH57792] [[Follow Up 194244] - TCER after changing test scripts have issues in CSV & filters.] [https://jazz.net/jazz02/resource/itemName/com.ibm.team.workitem.WorkItem/194869] +-- Product IBM Engineering Workflow Management [APAR PH55902] [Creating a query with a work item list attribute fails to run] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569944] [APAR PH57792] [Error message is not display while linking a work item to an approved test case] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569742] [APAR PH57792] [Exception occurred during change event processing for TRS feed] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/569877] 8. CLIENT APAR FIXES This client update site contains fixes for the following defects: [APAR ID] [Maintenance Item Summary] [Maintenance Item URL] +-- Product IBM Engineering Workflow Management [APAR PH57792] [Error raised when saving subset after remove action] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570276] [APAR PH57792] [Review Ant task help system for 7.0.3 updates] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570315] [APAR PH57792] [Saving matter after dragging and dropping a subset into another subset] [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570278] 9. NEW FEATURES & IMPROVEMENTS The following additional improvements for the interim fix for IBM Engineering Lifecycle Management (ELM) 7.0.3 are listed by application: 1. IBM Engineering Workflow Management (EWM) a. Support for new versions of GitLab in EWM: EWM 7.0.3 iFix001 and future iFixes now support integration with GitLab 16.4.0 and 15.3.1, and any future fix packs. 10. KNOWN ISSUES There is a known issue in some cases where the client will not find the product id after installing the iFix update site. This can make the EWM icon to not appear for the Eclipse instance as well as some problems with the help. The Eclipse Help -> About menu will not display EWM as installed: 570602: EWM Client 7.0.3 showing inaccurate Logo(Symbol) & missing files in Help section after adding UpdateSiteFor File [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570602] 570790: Investigate what causes the client to fail to load the product in some cases after updating to the iFix [https://jazz.net/jazz/resource/itemName/com.ibm.team.workitem.WorkItem/570790] There are two workarounds so far: 1) Run the client with -clean added to the eclipse.ini file 2) Rename the .jazz-scm folder to something else in the eclipse workspace and restart the client.