IBM System Storage™ DS Storage Manager version 10.36.xx.13 for Microsoft Windows Server 2008 - x64 and Windows Server 2003 SP2 - X64(AMD64/EM64T) edition operating system environments. Important: With the release of 07.36.08.00 and 07.36.12.00 controller firmware for the DS4000 and DS5000, customers are encountering a firmware bug that is causing the controllers to go into a continuous reboot cycle, which causes loss of access. There is no exposure to customers currently at 7.30.21.00, 7.15.07.00, 7.15.10.01, or 7.10.23.00. Customers who have downloaded the 07.36.08.00 or 07.36.12.00 levels of firmware, should not install this level of firmware. Customers who have installed this level of firmware should not make any configuration changes to the system and contact IBM Support immediately. For Customers who have downloaded the DS Storage Manager 10.36.65.07 code package, from the IBM Support web site, but have not yet installed firmware 7.36.08.00 or 7.36.12.00 , it is recommended that Storage Manager Firmware Upgrade Utility version 10.36.xx.07 or 10.36.xx.08 be uninstalled and version 10.36.xx.10 Firmware Upgrade Utility be installed and used to upgrade the controller firmware to 07.36.14.xx or higher. NOTE TO SERVICE – Reference RETAIN # N/A (C) Copyright International Business Machines Corporation 1999, 2008. All rights reserved. US Government Users Restricted Rights - Use, duplication, or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Note: Before using this information and the product it supports, read the general information in section 6.0 "Trademarks and Notices" in this document. Last Update: 03/27/2009 Please refer to corresponding Change History document for more information on new features and modifications. IMPORTANT: 1. DS4000 Storage Manager version 9.19.xx.12 and later is required for DS4000 storage subsystem users in countries implementing the new Daylight Saving Time (DST) rules (which includes U.S., Canada, Bermuda). Storage Manager version 9.19.xx.12 or later release includes revised DST transition dates to comply with provision of the Energy Policy Act of 2005 extension of Daylight Saving Time (DST) by four weeks, beginning in year 2007. Please refer to section 1.3 Enhancements for more information. 2. Microsoft Windows host attachment to the DS4200, DS4700, DS4800, DS5100 or DS5300 storage subsystems requires the additional purchase of the IBM DS4000/DS5000 Microsoft Windows operating system Host Kit Option or Feature Code. The IBM DS4000/DS5000 Microsoft Windows Host Kit options contain the required IBM licensing to attach an Microsoft Windows Host System to the DS4200, DS4700, DS4800, DS5100 or DS5300. Please contact your IBM service representative or IBM reseller for purchasing information. This host kit is shipped as standard in the DS4200 storage subsystem models 7VH, DS4700 storage subsystem models 70H, 70T, 72H and 72T and the DS4800 storage subsystem models 80H, 82H, 84H and 88H. 3. The Microsoft Windows NT4 and Windows 2000 is not supported with this version of the IBM System Storage™ DS Storage Manager. In addition, the only DS4000/DS5000 Storage Manager host software support on Microsoft Windows XP Professional and Microsoft Windows Vista (English only) operating systems is the DS Storage Manager client program. 4. Review section 3.2 "Hardware status and information" for the list of recommended fibre channel host bus adapters and their driver versions. Refer to the IBM System Storage™ Support Web Site or CD for the IBM System Storage DS Storage Manager Version 10 Installation and Host Support Guide. This guide along with the DS Storage Manager program Online Help provide the installation and support information. Products Supported ---------------------------------------------------------------- | New Model | Old Model | Machine Type | Model | |------------|-----------|--------------|------------------------| | DS5300 | N/A | 1818 | 53A | |------------|-----------|--------------|------------------------| | DS5100 | N/A | 1818 | 51A | |------------|-----------|--------------|------------------------| | DS4800 | N/A | 1815 | 82A, 82H, 84A, 84H, | | | | | 88A, 88H, 80A, 80H | |------------|-----------|--------------|------------------------| | DS4700 | N/A | 1814 | 70A, 70H, 72A, 72H, | | | | | 70T, 70S, 72T, 72S, | |------------|-----------|--------------|------------------------| | DS4500 | FAStT 900 | 1742 | 90X, 90U | |------------|-----------|--------------|------------------------| | DS4400 | FAStT 700 | 1742 | 1RX, 1RU | |------------|-----------|--------------|------------------------| | DS4300 | FAStT 600 | 1722 | 60X, 60U, 60J, 60K, | | | | | 60L | |------------|-----------|--------------|------------------------| | DS4200 | N/A | 1814 | 7VA, 7VH | |----------- |-----------|--------------|------------------------| | DS4100 | FAStT 100 | 1724 | 100, 1SC | |----------- |-----------|--------------|------------------------| | DS3400 | N/A | 1726 | 41X, 42X, HC4 | |----------- |-----------|--------------|------------------------| | DS3300 | N/A | 1726 | 31X, 32X, 31E, 32E | |----------- |-----------|--------------|------------------------| | DS3200 | N/A | 1726 | 21X, 22X, HC2 | ------------ --------------------------------------------------- ATTENTION: 1. The DS4000 storage subsystem controller firmware version 05.40.xx.xx and earlier along with its associated NVSRAM files should not be loaded into DS4000 storage subsystems connected to DS4000 EXP100 drive expansion enclosures. 2. For the DS4400 and the DS4100 storage subsystems - all models (Standard /dual controller and Single Controller), the controller firmware version 06.12.xx.xx and later must be used. 3. For the DS4300 storage subsystems with Single Controller option, the controller firmware version 05.34.xx.xx and its associated NVSRAM file must be used. Do not attempt to download the controller firmware version 06.xx.xx.xx into these DS4300 storage subsystem models with single controller option. 4. For the FAStT200 (M/T 3542-all models) and FAStT500 (M/T 3552-all models) storage subsystems, the controller firmware version 05.30.xx.xx and its associated NVSRAM file must be used. Do not attempt to download the controller firmware version 06.xx.xx.xx into these DS4000 storage subsystems. 5. For the DS4300 with Standard (base) or Turbo options and the DS4500 storage subsystems connected to the DS4000 EXP810 drive expansion enclosures, the latest controller firmware version 06.23.xx.xx (and higher) and its associated NVSRAM file must be used. It is also recommended that the DS4300 with Standard (base) or Turbo options and the DS4500 storage subsystems be upgraded to this controller firmware version even though they are not planned to have DS4000 EXP810 drive expansion enclosure attachment. 6. For the DS4700 and the DS4800 storage subsystems connected to the DS4000 EXP100 drive expansion enclosures, the controller firmware version 06.23.xx.xx (and higher) and its associated NVSRAM file must be used. It is also recommended that the DS4700 and the DS4800 storage subsystems be upgraded to this controller firmware version even though they are not planned to have DS4000 EXP100 drive expansion enclosure attachment. 7. For the DS3x00 storage subsystems, please refer to the readme files that are posted in the IBM DS3000 System Storage support web site for the latest information about their usage, limitations or configurations. http://www.ibm.com/servers/storage/support/ 8. For Host I/O attach, DS Storage Manager Installer (SMIA) package version 10.36.xx.xx for Microsoft Windows Server 2008 and Microsoft Windows Server 2003 SP2 editions, requires DS4000/DS5000 Controller firmware version 06.12.xx.xx or later. CONTENTS -------- 1.0 Overview 2.0 Installation and Setup Instructions 3.0 Configuration Information 4.0 Unattended Mode 5.0 Web Sites and Support Phone Number 6.0 Trademarks and Notices 7.0 Disclaimer ======================================================================= 1.0 Overview -------------- 1.1 Overview -------------- This is the release of the IBM DS Storage Manager 10.36 for Microsoft Windows Server 2008 and Microsoft Windows Server 2003 SP2 operating system environments. This version 10.36 of the DS Storage Manager host software is required for managing the DS5300-all models, the DS5100-all models, the DS4800-all models, the DS4700-all models, and the DS4200-all models with controller firmware version 07.36.xx.xx. In addition, it is also recommended for managing the following DS4000 storage subsystems - the DS4100-all models, DS4300-all models, the DS4400-all models, and the DS4500-all models with controller firmware version 05.34.xx.xx or higher installed. NOTE: DS4000 controller firmware versions 6.12.xx.xx * Attachment support for EXP710 and EXP100 SATA disk drive expansion enclosures. * No attachment support for EXP810 disk drive expansion enclosure. DS4000 controller firmware version 06.60.xx.xx * Attachment support for EXP710, EXP810, and EXP100 SATA disk drive expansion enclosures for DS4300 with dual controller, DS4500, DS4700 and DS4800. * Attachment support for EXP420 for DS4200 only. DS4000 controller firmware version 7.15.xx.xx * Supports DS4200, DS4700, and DS4800 only. DS5000 controller firmware version 7.30.xx.xx * Supports DS5100 and DS5300 only. DS4000/DS5000 controller firmware version 7.36.xx.xx * Supports DS4200, DS4700, DS4800, DS5100 and DS5300 only. The IBM Storage Manager host software version 10.36 new features and changes are described in the corresponding Change History document. Please refer to this document for more information on new features and modifications. Notes: 1. There are separate IBM DS Storage Manager host software version 10.36 packages for the following Microsoft Windows Server 2003-x86, Windows Server 2008-x86; Windows Server 2003 Intel Architecture Itanium 64bit (IA-64); and Windows Server 2008-x64, and Windows Server 2003-X64 64bit (AMD64 and EM64T). The WS03_WS08_X86, WS03_IA64, and WS03_WS08_X64 CD directories contain the files necessary for installing the IBM DS Storage Manager Version 10.36 host software in the Windows Server 2003 - x86, Windows Server 2008 - x86, Windows Server 2003 Intel Itanium2 64bit, Windows Server 2003 x64 and Windows Server 2008 x64 64bit (AMD64 and EM64T) Operating System (OS) environments, respectively. Please select the appropriate directory for your operating system environment. The host software and DS4000/DS5000 storage subsystem firmware files are packaged separately and are available for download from the IBM System Storage™ Disk Storage Systems Technical Support web site: http://www.ibm.com/servers/storage/support/disk/ 2. This version of DS Storage Manager host software does not support Microsoft Windows NT4 and Windows 2000 Operating System. In addition, the only DS Storage Manager host software support on Windows XP Professional OS and Windows Vista is the DS Storage Manager client (SMClient) program from the IBM DS Storage Manager host software package for Microsoft Windows Server 2008 - x86 (32bit). The IBM System Storage DS Storage Manager Version 10 Installation and Host Support Guide is also available on IBM's Support Web Site as a downloadable Portable Document Format (PDF) file. It contains the instructions for installing the IBM DS Storage Manager version 10.36 host software. Not all versions of Microsoft Windows operating systems are IO-attach support for each of the DS4000/DS5000 storage subsystem model. Windows Operating Systems Supported ------------------------------------ ----------------------------------------------------------- | DS4000 |Windows Server 2003/2008| Server 2003 | | Storage Subsystem | 32bit | 64bit - X64 | 64bit - IA64 | |-------------------|--------|---------------|--------------| | DS5300 | Yes | Yes | Yes | |-------------------|--------|---------------|--------------| | DS5100 | Yes | Yes | Yes | |-------------------|--------|---------------|--------------| | DS4800 | Yes | Yes | Yes | |-------------------|--------|---------------|--------------| | DS4700 | Yes | Yes | Yes | |-------------------|--------|---------------|--------------| | DS4500 | Yes | Yes | Yes | |-------------------|--------|---------------|--------------| | DS4400 | Yes | Yes | Yes | |-------------------|--------|---------------|--------------| | DS4300 | Yes | Yes | Yes | |-------------------|--------|---------------|--------------| | DS4200 | Yes | Yes | Yes | |-------------------|--------|---------------|--------------| | DS4100 | Yes | Yes | Yes | |-------------------|--------|---------------|--------------| | FAStT500 | No | No | No | |-------------------|--------|---------------|--------------| | FAStT200 | No | No | No | ------------------------------------------------------------ Note: Only the DS4300 with Standard (base) or Turbo options are supported for I/O attach with this release of DS Storage Manager Host Software for Windows. IMPORTANT: This release of IBM DS Storage Manager host software Client, supports managing all DS4000/DS5000 storage subsystems with general released firmware versions from 05.30.xx.xx up to 07.36.xx.xx and the DS3200, DS3400 and DS3300 storage subsytems with controller firmware version 07.35.xx.xx, or earlier, installed. Refer to the IBM Support Web Site for latest DS4000/DS5000 controller firmware and NVSRAM files for IBM machine types 1722, 1724, 1742, 1814, 1815, 1818, 3542 and 3552. The following table shows the first four digits of the latest controller firmware versions that are currently available for various models of the DS4000/DS5000 storage subsystems. --------------------------------------------------- | DS4000 Storage | Controller firmware version | | Subsystem Model | | |------------------|--------------------------------| | DS5300 (1818) | 07.36.xx.xx | |------------------|--------------------------------| | DS5100 (1818) | 07.36.xx.xx | |------------------|--------------------------------| | DS4800 (1815) | 07.36.xx.xx | | | | |------------------|--------------------------------| | DS4700 (1814) | 07.36.xx.xx | |------------------|--------------------------------| | DS4500 (1742) | 06.60.xx.xx | |------------------|--------------------------------| | DS4400 (1742) | 06.12.56.xx | |------------------|--------------------------------| | DS4300 Turbo | 06.60.xx.xx | | Option (1722) | | |------------------|--------------------------------| | DS4300 | 06.60.xx.xx | | Standard Option | | | (1722) | | |------------------|--------------------------------| | DS4300 Single | 05.34.xx.xx | | Controller Opt. | (for DS4300 SCU | | (SCU)(1722) | only) | |------------------|--------------------------------| | DS4200 (1814) | 07.36.xx.xx | |------------------|--------------------------------| | DS4100 (1724) | 06.12.56.xx | | (standard dual | | | Single | | | controller Opt.)| | |------------------|--------------------------------| | FAStT500 (3552) | 05.30.xx.xx | |------------------|--------------------------------| | FAStT200 (3542) | 05.30.xx.xx | --------------------------------------------------- Note: 1. Controller firmware 06.23.xx.xx or higher is required for the DS4300-standard- dual controller or Turbo models, the DS4500-all models, the DS4700- all models and the DS4800-all models for attaching combinations of EXP810 and EXP100 storage expansion enclosures behind a DS4000 storage subsystem. 2. Controller firmware version 06.12.xx.xx or higher is required for Host I/O attach with this release of DS Storage Manager for Windows. For the DS3x00 storage subsystems, please refer to the readme files that are posted in the IBM DS3000 System Storage support web site for the latest information about theirs usage, limitations or configurations. http://www.ibm.com/servers/storage/support/ New features that are introduced with the controller firmware version 07.36.xx.xx or later will not be available for any DS5000/DS4000 storage subsystem controllers without the controller firmware version 07.36.xx.xx or later installed. The following table shows the controller firmware versions required for attaching the various models of the DS4000/DS5000 Storage Expansion Enclosures. ------------------------------------------------------------------------------ | Controller | EXP Storage Expansion Enclosures | | FW Version |---------------------------------------------------------------| | | EXP100 | EXP420 | EXP500 | EXP700 | EXP710 | EXP810 | EXP5000 | |------------|--------|--------|--------|--------|--------|--------|---------| |5.3x.xx.xx | No | No | Yes | Yes | No | No | No | |------------|--------|--------|--------|--------|--------|--------|---------| |5.40.xx.xx | No | No | Yes | Yes | No | No | No | |------------|--------|--------|--------|--------|--------|--------|---------| |5.41.xx.xx | Yes | No | No | No | No | No | No | |------------|--------|--------|--------|--------|--------|--------|---------| |5.42.xx.xx | Yes | No | No | No | No | No | No | |------------|--------|--------|--------|--------|--------|--------|---------| |6.10.0x.xx | Yes | No | Yes | Yes | No | No | No | |------------|--------|--------|--------|--------|--------|--------|---------| |6.10.1x.xx | Yes | No | Yes | Yes | Yes | No | No | |------------|--------|--------|--------|--------|--------|--------|---------| |6.12.xx.xx | Yes | No | Yes | Yes | Yes | No | No | |------------|--------|--------|--------|--------|--------|--------|---------| |6.14.xx.xx | Yes | No | No | No | Yes | No | No | |------------|--------|--------|--------|--------|--------|--------|---------| |6.15.xx.xx | Yes | No | No | No | Yes | No | No | |------------|--------|--------|--------|--------|--------|--------|---------| |6.16.2x.xx | No | No | No | No | Yes | Yes | No | |------------|--------|--------|--------|--------|--------|--------|---------| |6.16.8x.xx | No | Yes | No | No | Yes | Yes | No | |------------|--------|--------|--------|--------|--------|--------|---------| |6.16.9x.xx | No | Yes | No | No | Yes | Yes | No | |------------|--------|--------|--------|--------|--------|--------|---------| |6.19.xx.xx | Yes | No | No | No | Yes | Yes | No | |------------|--------|--------|--------|--------|--------|--------|---------| |6.23.xx.xx | Yes | Yes | No | No | Yes | Yes | No | |------------|--------|--------|--------|--------|--------|--------|---------| |6.60.xx.xx | Yes | Yes | No | Yes | Yes | Yes | No | |------------|--------|--------|--------|--------|--------|--------|---------| |7.10.xx.xx | Yes | Yes | No | No | Yes | Yes | No | |------------|--------|--------|--------|--------|--------|--------|---------| |7.15.xx.xx | Yes | Yes | No | No | Yes | Yes | No | |------------|--------|--------|--------|--------|--------|--------|---------| |7.30.xx.xx | No | No | No | No | No | Yes | Yes | |------------|--------|--------|--------|--------|--------|--------|---------| |7.36.xx.xx | Yes | Yes | No | No | Yes | Yes | Yes | ------------------------------------------------------------------------------ Note: EXP500 and EXP710/EXP100 can not be attached behind the same DS4000 storage subsystem. In addition, the EXP500 can only be intermixed with EXP700 if the fibre channel speed of the EXP700 and the DS4000 subsystem drive loop is set to 1Gbps. ======================================================================= 1.2 Limitations ---------------- IMPORTANT: The listed limitations are cumulative. However, they are listed by the DS4000/DS5000 storage subsystem controller firmware and Storage Manager host software releases to indicate which controller firmware and Storage Manager host software release that they were first seen and documented. New limitations with Storage Manager Upgrade Utility package version 10.36.xx.13 release (controller firmware 07.36.xx.xx). 1. None New limitations with Storage Manager Upgrade Utility package version 10.36.xx.07b release (controller firmware 07.36.xx.xx). 1. Upgrade of DS4000 to 7.xx.xx.xx using the upgrade tool with non-English OSes will end with an error. The current firmware column still shows the previous version, pending version will show 7.xx.xx.xx, instead of 'none'. Checking the upgrade tool log you will find: [12.11.2008 08:51:16] [rey-ds4700-1] [SUPPORT_SERVICES] [DownloadAndActivate] activation failed There are two ways to check the content of this log: 1. As long as the upgrade tool is still open: Use the 'View log' button 2. If the upgrade tool was closed already: For windows all logs can be found in this folder: C:\Program Files\IBM_DS4000FirmwareUpgrade\client For other operating systems, check in the appropriate folder. Syntax of the name is similar to 20081114_1501.log. Then check the profile. Here the new firmware can be found as pending: Current configuration: Firmware version: 06.60.17.00 NVSRAM version: N1814D470R916V17.dlp Pending configuration: Staged firmware download supported: Yes Firmware version: 07.36.12.00 NVSRAM version: N1814D47R1036V12.dlp This shows that firmware was loaded to controller but not yet activated. Workaround: After checking the items listed in Details section, activate the loaded firmware using this script command: activate storageSubsystem firmware; Mark the affected system in the Enterprise Management window of the Storage Manager. In the menu, go to Tools -> Execute script. A new window will show up. Paste the command in the upper part of this window and choose Tools -> Execute only. The activation will take a while and the controller will reboot. New limitations with Storage Manager Installer (SMIA) package version 10.36.xx.07 release. 1. With Windows Vista and Windows Server 2008, when you try to write a file using the SMcli command, the command reports that the file has been written, but the file was not written. The SMcli should issue an error code or a statement that the file was not written to the disk. Disable the Use User Account Control (UAC) option, or start the DOS prompt in an administrator mode, which gives you permission to write to the disk. Try to write the file again. New limitations with Storage Manager Installer (SMIA) package version 10.30.xx.09 release. 1. Using VDS/VSS utilities (diskraid and diskpart) to create and map volumes may not immediately see the LUNs listed on the host due to PnP taking time to scan for the devices. Wait for the devices to show up in device manager prior to using diskpart. 2. When writing an SMcli command file, the command reports that the file is written, but you cannot find the file. User Account Control is enabled on the host, and it does not allow you to modify any files on the hard drive without permission. Disable this control, and rerun the SMcli command. 3. If you use a storage array as a boot device for the Windows Server 2003 operating system, you cannot use the hibernation feature. New limitations with Storage Manager Installer (SMIA) package version 10.15.xx.08 release. 1. Reconfiguration operation (DRM) is delayed under some circumstances. When a drive fails before the DRM completes, it can take up to eight times as long for the DRM to complete. DRM reconfigurations to RAID 6 have the longest impact since there are four times as many calculations and writes that have to occur compared to other RAID levels. 2. Host Software display of controller current rate is wrong below 4Gbps. Host Software Client - AMW - Logical/Physical View - Controller Properties - Host Interfaces - Current rate is displaying "Not Available" when the controller negotiated speed is 2Gbps. When the controller negotiated speed is reduced to 1GBs, the Current rate displays "2Gbps" New limitations with Storage Manager Installer (SMIA) package version 10.10.xx.xx release (controller firmware 07.10.xx.xx). 1. Controller Alarm Bell icon does not appear as a flashing icon indicator on the screen to get the user's attention but the icon does change appearances. 2. Miswire of drive tray cabling with DS4700 and DS4200 can cause continuous reboot of a controller. To correct this situation, power down the subsytem, cable the drive trays correctly, and power the subsystem back up. 3. Controller button may appeared enabled and mislead the user that a controller is selected where in fact, a controller was not highlighted for the botton to appear ready. 4. Search key is not marked correctly in that page due a JavaHelp Bug with JavaHelp 2.0_01. A search for keyword "profile" ended with phase "prese 'nting p' rofile" being marked. 5. storageArrayProfile.txt should be renamed as storageSubsystemProfile.txt in Support Data. 6. Bullets Incorrectly Placed in Volume Modification Help Page 7. Unable to Escape out of Help Display. User will be required to close the window by using window close procedure (exit, etc.) 8. Bullets and Descriptions not alligned into same line in "Viewing mirror properties". 9. The Help window is not getting refreshed properly when using the AMW.Help window. Workaround is to close and reopen SANtricity. 10. CLI command failure for creation of volume(s) if capacity parameter syntax is not specified. A space will need to be used between the integer value and the units used in the capacity option of this command or, "create volume volumeGroup[4] capacity=15 GB…". 11. Customer will see high ITW counts displayed in GUI (RLS feature) and logs (files) for diagnostics (support bundle, DDC, etc.) and may be concerned that he has a problem. This will not cause a Critical MEL event. Known problem previously restricted, when a DS4700 or DS4200 controller reboots, these counters increment. 12. Single tray powercycle during IO activity causes drives in tray to become failed. Customer may see loss of drive (failed) due to timing issue of drive detection & spin-up of the drive. There are one of two conditions that result on power-up: - (Most likely) Drive will be marked as optimal/missing with the piece failed, or - (rarely) Drive will be marked as failed with the piece failed. Workaround is to unfail (revive) drive which restarts reconstruction of all pieces. 13. Event log critical Event 6402 was reported after creating 64 mirror relations. Eventually, the mirror state transitions to synchronizing and proceeds to completion on mirror creation. Workaround is to ignore the MEL logging since this occurs on creation of mirror volumes. 14. Reconfiguration operations during host IO may result in IO errors when arrays contain more than 32 LUNs. These operations include Dynamic Capacity Expansion, Defragmentation, Dynamic Volume Expansion, Dynamic RAID Migration. The workaround is to quiesce host IO activity during reconfiguration. 15. Heavy IO to a narrow volume group of SATA drives can result in host IO timeouts. A narrow volume group refers to an array built of very few drives; namely 1 drive RAID 0, 1x1 RAID 1, and 2 + 1 RAID 5. The workaround is to build arrays of SATA drives out of 4 + 1 or greater. 16. When managing the storage subsystem in-band, the upgrade utility will show the upgrade as failed. This is because of the update and reboot of the controllers when activating the new firmware. SMagent is not dynamic and will need to be restarted to reconnect to the storage subsystem. 17. Selecting and dragging text within the storage profile window causes the window to be continuously refreshed. Work around is to select and copy, do not drag the text. 18. When configuring alerts through the task assistant, the option stays open after selecting OK. The window only closes when the cancel button is selected. 19. The Performance Monitor displays error messages when the storage subsystem is experiencing exception conditions. The performance monitor has a lower execution priority within the controller firmware than responding to system IO and can experience internal timeouts under these conditions. 20. Critical MEL event (6402 - Data on mirrored pair unsynchronized) can occur under certain circumstances with synchronous RVM. The most likely scenario is when both primary and secondary are on a remote mirror and an error occurs with access to that host. Resynchronization should occur automatically, when automatic resynchronization is selected for a mirror relationship. However if any of the host sites should go down during this interval, recovery by the user is required. 21. A persistent miswire condition is erroneously reported through the recovery guru even though the subsystem is properly wired. The frequency of occurrence is low and is associated with an ESM firmware download or other reboot of the ESM. The ESM that is reporting the problem must be reseated to eliminate the false reporting. Not all miswire conditions are erroneous and must be evaluated to determine the nature of the error. 22. Drive path loss of redundancy has been reported during ESM download. This occurs when a drive port is bypassed. In some instances this is persistent until the drive is reconstructed. In other cases it can be recovered through an ESM reboot (second ESM download, ESM pull and replace). 23. Unexpected drive states have been observed during power cycle testing due to internal controller firmware contention when flushing MEL events to disk. The drives have been observed as reconstructing or replaced when they should have been reported as failed. Also volume groups have been reported degraded when all drives were assigned and optimal. An indication that this is the situation would be when drive reconstruction has not completed in the expected amount of time and does not appear to be making any progress. The work around is to reboot the controller owning the volume where the reconstruction has stalled. 24. Sometimes when an ESM is inserted a drive's fault line is asserted briefly. The fault line almost immediately returns to inactive, but the ESMs may bypass the drive. In these circumstances, the administrator will have to reconstruct the failed drive. 25. After a drive fail, a manually initiated copyback to a global hot spare may also fail. The work around is to remove the failed drive and reinsert it, then the copyback should resume and complete successfully. 26. When an erronieous miswire condition occurs (as mentioned above in 21), the recovery guru reports the miswire on one controller but not on the other. In this situation, ignore the other controller and use the information supplied by the controller reporting the problem. 27. Occasionally a controller firmware upgrade to 07.10 will unexpectedly reboot a controller an extra time. This could generate a diagnostic data capture, however the firmware upgrade is always successfull. 28. When managing previous releases of firmware (06.19 and prior), "working" gets displayed as "worki" during volume creation. 29. The Performance Monitor error window does not come to the front. You must minimize all other foreground windows to get to the error popup window. 30. When a disk array is in a degraded state, the array will report "needs attention" to both the EMW and the AMW. After taking appropriate corrective action, the AMW view of the array will report "fixing" but the EMW state remains at "needs attention". Both statuses are valid, when the fault state is resolved both views will change to "optimal". 31. Storage subsystem loses in-band connectivity during volume creation. This is caused by the controller logout to all hosts that are in the default host group when those hosts have QLogic HBAs which is not tolerant of the controller initiated logout. The work around is to first create the host group and host port mappings prior to creation of volumes. Then on volume creation avoid using the default host group. 32. When defining additional LUN mappings to a host, the volume name moves down to the bottom of the visible list making it difficult to keep track of the list. 33. A Windows server will experience a Blue Screen and will need to be rebooted when one or more controllers go offline in a storage subsystem. A LUN/path may be in the process of being removed because an HBA has not reestablished a login with the controller and the PnP process will remove all LUNs associated with that path. The timing of this should not be seen unless the customer is experiencing major problems with controllers going into offline states. 34. With SMProvider installed, the disk management on the server does not complete within 1 hour for a configuration of 20 or more storage subsystems attached on the subnet. This is an issue with the auto-discovery of storage IP addresses by the SMProvider that supports the VDS/VSS feature of Windows. On installation of the SMProvider, add all of the IP addresses for the storage subsystems into the registry. On reboot, the registry contains the list of IP addresses and avoids the auto-discovery delay. The registry location is: HKEY_LOCAL_MACHINE\SOFTWARE\Storage\SMprovider /v IpAddresses /t REG_SZ /d If the value is empty, the providers will use the auto-discovery method. 35. Result of an installation not completing normally because of a crash, blue screen, or other interruption will prevent the SMclient from being able to uninstall. This is because the InstallAnywhere program writes to the ZeroG registry file at the very end of the installation process. Reinstall the package to overwrite the installation and populate the ZeroG registry. 36. Using ALT-Q to access the QLogic HBA BIOS will hang the host, use CTL-Q instead. 37. Intermittently the flashcopy utility using the VSS provider fails to create persistent flashcopies. The flashcopy volume is created at the storage subsystem and the volume mappings complete successfully, but after about one minute the vshadow utility removes the volume because Microsoft's PnP driver does not detect the flashcopy volume in time. If a flashcopy failure has occurred, or the limit on flashcopies has been reached, remove any unnecessary flashcopies on the storage subsystem and retry the failed flashcopy request. Please note that some utilities such as NetBackup do not automatically clean up the failed request by removing these failed flashcopies from the storage array. 38. Startup of MS DISKRAID utility executing through VDS occasionally reports an error. The following message is reported: "Diskraid encountered a fatal error while initializing. The following information may help diagnose the error: Error: 0x80080005 Location Code: 2" The server must be rebooted to recover, shutdown and restart of the VSS/VDS service does not fix the problem. 39. Configuring separate Email alerts when two Enterprise management windows are open on the same host will cause the alerts to disappear if one of the Enterprise windows is shut down and then restarted. It is recommended that if multiple Enterprise management windows needs to be open, that they are open on separate Hosts which will indeed allow the configuration of alerts to be saved if one of the enterprise management windows is shut down and restarted. Legacy restrictions that are still applicable: 1. Reflected Fibre Channel (FC) OPN frames occurs when intermixing the EXP810, EXP710 and EXP100s behind DS4700 or DS4800 storage subsystems. This behavior causes excessive drive side timeout, drive side link down and drive side link up events be posted in the DS4000 storage subsystem Event log (MEL.) It might also cause drives to be by-passed or failed by the controller. NEW DRIVE SIDE FC CABLING REQUIREMENT MUST BE ADHERED TO WHEN HAVING EXP100 CONNECTED TO THE DS4700 OR DS4800 STORAGE SUBSYSTEMS. Please refer to the latest version of the Installation, User's and Maintenance Guide for these storage subsystems that are posted in the IBM DS4000 Support web site for more information. http://www.ibm.com/servers/storage/support/disk/ 2. Can not increase the capacity of RAID arrays. RAID arrays with certain combinations of selected segment size and number of drives that made up the arrays will exceed the available working space in controller dacstore, causing a reconfiguration request (like expanding the capacity of the array) to be denied. These combinations are generally the largest segment size (512KB) with the number of drives in the array is 15 drives or more. There is no work-around. C324144 105008 3. Interoperability problem between the Tachyon DX2 chip in the DS4500 and the DS4300 storage subsystem controllers and the Emulex SOC 422 chip in the EXP810 expansion enclosure ESMs causing up to 5 Fibre Channel loop type errors to be posted in the DS4000 storage subsystem Major Event Log during a 24 hour period. There is a small window in the SOC 422 chip that multiple devices can be opened at one time. This ultimately leads to Fibre Channel loop errors of Fibre Channel link up/down, Drive returned CHECK CONDITION, and Timeout on drive side of controller. IBM recommends the use of the Read-Link-Status function to monitor drive loop for any problems in the drive loop/channel. There is no work-around. 4. The single digit of the Enclosure IDs for all enclosures (including the DS4000 storage subsystem with internal drive slots) in a given redundant drive loop/channel pair must be unique. For example, with four enclosures attached to the DS4300, the correct enclosure ID settings should be x1, x2, x3, and x4 (where x can be any digit that can be set). Examples of incorrect settings would be 11, 21, 31, and 41 or 12, 22, 32, and 62. These examples are incorrect because the x1 digits are the same in all enclosure IDs (either 1 or 2). If you do not set the single digit of the enclosure IDs to be unique among enclosures in a redundant drive loop/channel pair, then drive loop/channel errors might be randomly posted in the DS4000 subsystem Major Event Log (MEL), especially in the cases where the DS4300 storage substems are connected to EXP810s and EXP100s. In additon, enclosure IDs with same single digits in a redundant drive loop/channel pair will cause the DS4000 subsystem controller to assign a soft AL_PA address to devices in the redundant drive loop/channel pair. The problem with soft AL_PA addressing is that AL_PA address assignment can change between LIPs. This possibility increases the difficulty of troubleshooting drive loop problems because it is difficult to ascertain whether the same device with a different address or a different device might be causing a problem. 5. In DS4000 storage subsystem configurations with controller firmware 6.15.2x.xx and higher installed, the performance of write intense workloads such as sequential Tape restores to DS4000 Logical drives with large I/O request sizes (e.g. 256kB) is degraded if the DS4000 logical drives are created with small segment sizes such as 8KB or 16KB. The work around is to create the DS4000 logical drives with segment size of 64KB or higher. 6. Do not pull or insert drives during the drive firmware download. In addition, ALL I/Os must also be stopped during the drive firmware download. Otherwise, drives may be shown as missing, unavailable or failed. 7. Do not perform other storage management tasks, such as creating or deleting logical drives, reconstructing arrays, and so on, while downloading the DS4000 storage subsystem controller firmware and DS4000 EXP ESM firmware. It is recommended that you close all storage management sessions (other than the session that you use to upgrade the firmware) to the DS4000 storage subsystem that you plan to update. 8. For Microsoft Windows Server 2003 R2 operating systems. When loading the Microsoft Hot fix KB916048, required in installing Storage Manager, if the IBM xSeries Server hangs during reboot it may be resolved by using the latest Broadcom driver for the Bcom HT1000. ======================================================================== 1.3 Enhancements ----------------- The DS Storage Manager version 10.36.xx.xx host software for Microsoft Windows Server 2003 and Server 2008 operating systems in conjunction with controller firmware version 7.36.xx.xx provides supports for - Maintenance Release for DS5300, DS5100, DS4800, DS4700, and DS4200. See change history file for detail list of field fixes. - Increased the number of supported Host Types from 16 to 32. - Storage Manager v10.36 Event Monitor installation default changed from disabled to enabled. - Additional MEL Health Checks have been included in the Storage Manager Firmware Upgrade Utility; > MEL entries have wrapped during the last 24 hours > More than 10 DDE Critical MEL events reported in the last 7 days > More than 2 Page 2C Critical MEL events reported in the last 7 days > More than 1 Unscheduled Controller Reboot Critical MEL evens (0x5005, 0x5040) reported in the last 7 days > More than 2 Degraded Drive Channel Critical MEL events reported in the last 7 days > More than 8 Host side Channel Error Critical MEL events reported in the last 7 days > Non-redundant Drive Side cabling on the drive side > More than 4 critical MEL entries in the last 7 days > Add check for event showing MEL was cleared and record this in the Utility Log. Please refer to the New Features section of the IBM System Storage DS Storage Manager Version 10 Installation and Host Support Guide for additional information about the IBM DS Storage Manager version 10 enhancements. ======================================================================= 1.4 Level Recommendation and Prerequisites for the update ----------------------------------------------------------- Note: The IBM Storage Manager host software version 10.36 for Microsoft Windows operating systems, new features and changes are described in the corresponding Change History document. Please refer to this document for more information on new features and modifications. Microsoft Windows NT4 SP6 and Windows 2000 SP4 operating systems are not supported for this release of IBM DS Storage Manager version 10.36.xx.xx. The only supported Microsoft operating systems are the x86, x64 and IA64 editions of Windows Server 2003 with SP2, the x86 and x64 editions of Windows Server 2008, and Windows Vista (English only) 32bit. For the 32bit Windows Vista, Server 2003 (X86), or Server 2008 (x86) editions, IBM xSeries and other Intel-based servers with minimum 1024MB Memory with at least 512KB L2 Cache Pentium III 1Ghz processor(s) is recommended. For the Intel Itanium II 64bit Microsoft Windows Server 2003 edition, IBM xSeries and other Intel-based servers with minimum 1024MB Memory with Intel Itanium II processor(s) is recommended. For the X64 64bit (AMD64 and EM64T) Microsoft Windows Server 2003 and Microsoft Windows Server 2008 edition, IBM xSeries and other servers with minimum 2048MB Memory with Intel EM64T or AMD AMD64 processor(s) is recommended. (also see Dependencies section) Client Code levels at time of release are as followed --------------------------------------------------------- Important: 1. This release of IBM DS Storage Manager host software Client supports managing all DS4000/DS500 storage subsystems with general released firmware versions from 05.30.xx.xx up to 07.36.xx.xx. 2. There are three separate IBM DS Storage Manager host software version 10.36 packages for the following Microsoft Windows OSes - Windows Vista 32bit, Windows Server 2003 Intel Architecture (x86), and Windows Server 2008 (x86); Windows Server 2003 Intel Architecture Itanium II 64bit (IA-64); Windows Server 2003 (x64) and Windows Server 2008 (x64). Please download the correct one for your operating system environment. 3. When using the Fibre Channels host bus adapter device driver based on the Microsoft STORport miniport drive model, you must install Microsoft Windows Server 2003 STORport hot-fix KB932755 - An updated Storport storage driver (version 5.2.3790.4021) Operating Systems support Packs: - Windows Server 2008: SP1 - Windows Server 2003: SP2 - Windows Vista (Supports English only) For Microsoft Windows Server 2003 x86 (32bit), Server 2008 x86 only: Starting with the DS4000 storage manager version 10.10, there is a controller firmware upgrade tool included. The version of Storage Manager firmware upgrade installer is SMFWUpgInstaller-WS32-10.36.35.10. This installer will install the following versions of firmware upgrade packages: 1. SMfwupgrade - 10.36.G5.05 2. SMfirmware - 10.36.G5.08 Starting with the DS4000 storage manager version 9.12, all of the host- software packages are included in a single host-software installer wizard. During the execution of the wizard, the user will have a choice to install all or only certain software packages depending the need for a given server. The version of the host software installer wizard for this release is SMIA-WS32-10.36.35.13.exe. This wizard will install the following version of the host-software packages: 1. IBM DS Storage Manager Client version: 10.36.G5.09 2. IBM DS Storage Manager MPIO/DSM version: 01.03.0305.0016 Note: The MPIO/DSM multipath driver is supported with controller firmware version 06.12.xx.xx or higher. For Window Server 2003 and Windows Server 2008, install the latest STORport driver with the MPIO/DSM multipath driver. 3. IBM DS Storage Manager Agent version: 10.00.35.05 4. IBM DS Storage Manager Utilities version: 10.00.35.06 5. IBM DS Storage Manager ESM version: 10.36.G5.02 In addition, for DS4000/DS5000 configurations with Microsoft Windows servers using Veritas Volume Manager (DMP) 4.2 and 4.3 as multipath driver, you have to obtain the correct asl file for DS4000/DS5000 storage subsystem using the following Veritas Support URL. http://seer.support.veritas.com/docs/273458.htm (for DMP 4.2) http://seer.support.veritas.com/docs/281172.htm (for DMP 4.3) For Microsoft Windows Server 2003 Intel Itanium II 64bit (IA64) edition only: Starting with the DS4000 storage manager version 10.10, there is a controller firmware upgrade tool included. The version of Storage Manager firmware upgrade installer is SMFWUpgInstaller-WS64-10.36.35.10. This installer will install the following versions of firmware upgrade packages: 1. SMfwupgrade - 10.36.G5.05 2. SMfirmware - 10.36.G5.08 Starting with the DS4000 storage manager version 9.12, all of the host-software packages are included in a single host-software installer wizard. During the execution of the wizard, the user will have a choice to install all or only certain software packages depending the need for a given server. The version of the host-software installer wizard for this release is SMIA-WS64-10.36.35.13.exe. This wizard will install the following version of the host-software packages: 1. IBM DS Storage Manager Client version: 10.36.G5.09 2. IBM DS Storage Manager MPIO/DSM version: 01.03.0305.0016 Note: The MPIO/DSM multipath driver is supported with controller firmware version 06.12.xx.xx or higher. 3. IBM DS Storage Manager Agent version: 10.00.35.05 4. IBM DS Storage Manager Utilities version: 10.00.35.06 5. IBM DS Storage Manager ESM version: 10.36.G5.02 For Microsoft Windows Server 2008 x64 and Microsoft Windows Server 2003 X64 64bit (AMD64 and EM64T) edition only: Starting with the DS4000 storage manager version 10.10, there is a controller firmware upgrade tool included. The version of Storage Manager firmware upgrade installer is SMFWUpgInstaller-WSX64-10.36.35.10. This installer will install the following versions of firmware upgrade packages: 1. SMfwupgrade - 10.36.G5.05 2. SMfirmware - 10.36.G5.08 Starting with the DS4000 storage manager version 9.12, all of the host-software packages are included in a single host-software installer wizard. During the execution of the wizard, the user will have a choice to install all or only certain software packages depending the need for a given server. The version of the host-software installer wizard for this release is SMIA-WSX64-10.36.35.13.exe. This wizard will install the following version of the host-software packages: 1. IBM DS Storage Manager Client version: 10.36.G5.09 2. IBM DS Storage Manager MPIO/DSM version: 01.03.0305.0016 Note: The MPIO/DSM multipath driver is supported with controller firmware version 06.12.xx.xx or higher. 3. IBM DS Storage Manager Agent version: 10.00.35.05 4. IBM DS Storage Manager Utilities version: 10.00.35.06 5. IBM DS Storage Manager ESM version: 10.36.G5.02 For Windows Vista (English only) 32bit (IA32/X86) only: Starting with the DS4000 storage manager version 10.10, there is a controller firmware upgrade tool included. The version of Storage Manager firmware upgrade installer is SMFWUpgInstaller-WS32-10.36.35.10. This installer will install the following versions of firmware upgrade packages: 1. SMfwupgrade - 10.36.G5.05 2. SMfirmware - 10.36.G5.08 The version of the host software installer wizard for this release is SMIA-WS32-10.36.35.13.exe. This wizard will install the following version of the host-software packages: 1. IBM DS Storage Manager Client version: 10.36.G5.09 Refer to the http://www.ibm.com/servers/storage/support/disk IBM System Storage™ Disk Storage Systems Technical Support web site for the latest released code levels. ======================================================================= 1.5 Dependencies ----------------- ATTENTION: 1. DS4000 storage subsystem CONTROLLER FIRMWARE VERSION 06.1X.XX.XX REQUIRES THAT THE FIRMWARE VERSION OF AN ATTACHED EXP700 ENVIRONMENTAL SERVICE MODULE (ESM) BE AT VERSION 9326 OR HIGHER. IF THE EXP700 ESM FIRMWARE IS EARLIER THAN THE 9326 VERSIONS, THE EXP700 ENCLOSURE AND THE INSTALLED DRIVES MAY NOT BE DISPLAYED IN THE DS4000 SUBSYSTEM MANAGEMENT WINDOW AFTER THE CONTROLLER FIRMWARE IS UPGRADED. THE CURRENT RELEASE ESM FIRMWARE VERSION FOR THE EXP700 ESM IS 9330. 2. DS4000 STORAGE SUBSYSTEM CONTROLLER FIRMWARE VERSION 06.1X.XX.XX REQUIRES THAT THE FIRMWARE VERSION OF AN ATTACHED EXP100 ENVIRONMENTAL SERVICE MODULE (ESM) BE AT VERSION 955X OR HIGHER. IT IS NOT POSSIBLE TO UPGRADE EXP100 ESM FIRMWARE VERSIONS THROUGH 953X TO VERSION 955X WHEN THE CONTROLLER FIRMWARE IS AT 06.1X.XX.XX. TO DETERMINE THE FIRMWARE LEVEL OF AN EXP100 ESM, IDENTIFY THE PRODUCT LABEL LOCATED AT THE REAR OF THE EXP100 ENCLOSURE. ONLY LABELS ON WHICH THE FIELD REPLACEABLE UNIT (FRU) PART NUMBER READS 25R0156 POSITIVELY INDICATE THAT AN ESM MODULE IS RUNNING FIRMWARE VERSION 955X OR HIGHER. IF THERE IS NO LABEL OR THE PART NUMBER ON THE LABEL DOES NOT READ 25R0156, THE ESM MAY STILL HAVE THE FIRMWARE VERSION 955X OR HIGHER IF IT HAD BEEN PREVIOUSLY UPGRADED. IF NECESSARY, CONTACT YOUR IBM REPRESENTATIVE, SUPPORT, OR RESELLERS FOR ASSISTANCE. IN ADDITION, IT IS NOT POSSIBLE TO UPGRADE THE ESM FIRMWARE FROM VERSION 953X TO VERSION 956X OR LATER DIRECTLY. THE 953X ESM MUST BE UPGRADED TO VERSION 9554 FIRST BEFORE IT CAN BE UPGRADED TO VERSION 956X. 3. CURRENTLY, THE ONLY DS4000 STORAGE SUBSYSTEMS THAT ARE SUPPORTED BY THE 06.12.XX.XX CONTROLLER FIRMWARE VERSION ARE THE DS4100 - ALL MODELS, THE DS4300 WITH STANDARD (DUAL CONTROLLER) OR TURBO OPTIONS, THE DS4400 AND THE DS4500. DO NOT DOWNLOAD THIS CONTROLLER FIRMWARE ON ANY OTHER DS4000 STORAGE SUBSYSTEM. THERE IS NOT ANY CHECKING FOR THIS RESTRICTION INSIDE THE STORAGE MANAGER CLIENT PROGRAM. 4. The only DS4000 storage subsystems that are supported by the 06.14.xx.xx or higher (06.14.xx.xx, 06.15.xx.xx, 06.16.xx.xx, 06.19.xx.xx or 6.23.xx.xx) controller firmware version are the DS4200 (06.16.88.xx or higher), DS4300 Standard-dual controller or Turbo models (06.19.xx.xx or higher), and the DS4500 (06.19.xx.xx or higher), DS4700 (06.16.4x.xx or higher) and DS4800 (06.14.xx.xx or higher) storage subsystems. Currently, there are not any controller firmware packages version 06.14.xx.xx and higher for other DS4000 storage subsystems. Do not download this controller firmware on any other DS4000 storage subsystems. 5. Always check the README files (especially the Dependencies section) that are packaged together with the firmware files for any required minimum firmware level requirements and the firmware download sequence for the DS4000 drive expansion enclosure ESM, the DS4000 storage subsystem controller and the hard drive firmware. 6. If the managed DS4000 storage subsystem had the FC/SATA intermix premium feature enable, do not upgrade the controller firmware from version 06.10.xx.xx to version 06.12.xx.xx until a FC/SATA intermix premium feature key file is generated and available. Once the controller firmware is upgraded to version 06.12.xx.xx, the FC/SATA intermix premium feature will be shown as out-of-compliance and the FC/SATA intermix premium feature key file is required to re-enable the feature. When the FC/SATA intermix premium feature is in out-of- compliance state, LUNs management functions like creations, deletions and modifications will not be operational. Please refer to the FC/SATA intermix premium feature activation card that was shipped with the FC/SATA intermix premium feature kit for instructions to generate the required premium key file. 7. The DS4700 and DS4800 storage subsystems do not support the attachment of the DS4000 EXP700 drive expansion enclosures. The EXP700 enclosure must be upgraded into DS4000 EXP710 enclosure using the DS4000 EXP700 Models 1RU/1RX Switched-ESM Option Upgrade Kit before it can be attached to the DS4700 and DS4800 storage subsystems. 8. THE DS4000 STORAGE SERVER WITH CONTROLLER FIRMWARE VERSION 05.41.1X.XX MUST BE UPGRADED TO CONTROLLER FIRMWARE VERSION 05.41.5X.XX FIRST BEFORE IT CAN BE UPGRADED TO CONTROLLER FIRMWARE VERSION 06.1X.XX.XX OR LATER. OTHERWISE, THE ERROR 231-FIRMWARE INCOMPATIBLE WILL BE DISPLAYED. 9. DS4000 storage subsystem controller firmware versions 6.12.16.xx or higher and EXP100 storage expansion enclosure ESM firmware version 9563 or higher are required to provide support for the new 400G SATA drive options and CRUs (P/Ns 39M4570 and 39M4575, respectively) in addition to the new 250G SATA drive CRUs (P/N 40K6837.) This new 250G SATA drive CRU is functionally equivalent to the previously-released CRUs (P/N 90P1349). 10. The version 06.16.xx.xx of the DS4700 or DS4800 controller firmware is not compatible with the EXP100 SATA drive expansion enclosures. DO NOT download it into the DS4800 storage subsystems that have EXP100 drive expansion enclosures attached. After the 06.16.xx.xx controller firmware is activated, the DS4800 storage subsystem will not recognize the drives in EXP100 enclosures, causing loss of data availability to the raid arrays and logical drives that are defined in those drives. IBM recommends installing the controller firmware version 6.23.xx.xx and higher in the DS4000 storage subsystems that have EXP100 SATA drive expansion enclosure attached instead. 11. Controller firmware 06.16.xx.xx or higher is required to support EXP810 storage expansion enclosures. 12. Controller firmware 06.16.4x.xx and higher is required for the DS4700 -all models and the DS4800-model 80A/80H. These models do not support older 06.16.xx.xx versions of controller firmware. The attachment of EXP100 enclosures is ONLY supported for these models only if the controller firmware is upgraded to version 6.23.xx.xx or higher. 13. Controller firmware 06.16.88.xx and higher is required for the DS4200-all models. These models do not support older 06.16.xx.xx versions of controller firmware. The attachment of EXP100, EXP710 and EXP810 enclosures is not supported for these DS4200 models. 14. When using STORport miniport version of the Fibre Channel host bus adapter device driver, Windows Server 2003 service pack 1 must be installed along with the Microsoft Windows Server 2003 STORport hot- fix KB916048 - An updated Storport storage driver (version 5.2.3790.2723) is available for Windows Server 2003. The Windows Server 2003 service pack 1 and the STORport hot-fix 916048 are available for download at the Microsoft support web site. 15. The latest version of Microsoft Windows SCSIport and the STORport FC HBA device drivers do not support the BUSCHANGE=0 parameter. It requires the DS4000 storage subsystem controller firmware to be compatible with the MS Plug and Play driver. Not all versions of the DS4000 storage subsystem controller firmware are compatible with the Microsoft Plug and Play driver. Currently, only the controller firmware versions that are listed in the table below for each of the DS4000 subsystems, which support the SCSIport device drivers with BUSCHANGE parameter set to Microsoft required default value of 2, are compatible with the MS Plug-and-Play driver. ------------------------------------------ | DS4000 | Controller Firmware | | Storage Subsystem | Version Required | ------------------------------------------- | DS4700 | 06.16.8x.xx or later| | DS4800 | 06.15.2x.xx | | | 06.16.8x.xx or later| | DS4500 | 06.12.27.xx or later| | DS4400 | 06.12.27.xx or later| | DS4300 | 06.12.27.xx or later| | DS4200 | 06.16.88.xx or later| | DS4100 | 06.12.27.xx or later| ------------------------------------------ Do not use STORport miniport device driver or FAStT/DS4000 FC HBA SCSIport device driver version 9.1.2.11 and higher in the Microsoft Windows servers that have IO access to the DS4000 storage subsystems with controller firmware that are not listed in the controller firmware table above. Please check with your IBM reseller, IBM representative, or the DS4000 interoperability matrix for information on future DS4000 storage subsystems support of this device driver without BUSCHANGE=0 parameter. 16. Controller firmware 06.19.xx.xx and higher is required for the DS4300- standard-dual controller or Turbo models and the DS4500-all models for attaching the EXP810 storage expansion enclosures. 17. Controller firmware 06.23.xx.xx and higher is required for the DS4700- all models and the DS4800-all models for attaching EXP810, EXP710 and EXP100 together behind a DS4000 storage subsystem. The intermix of EXP810 and EXP100 behind a DS4700 or DS4800 is supported only with controller firmware version 6.23.xx.xx and higher. 18. The DS5100 and DS5300 storage subsystems do not support the attachment of the DS4000 EXP100, EXP700, EXP710, and EXP810 drive expansion enclosures. 19. The DS5000 EXP5000 drive expansion enclosure is supported attached to the DS5100 and DS5300 only. IBM DS Storage Manager version 10.36 provides full management support for DS4000/DS5000 storage subsystems that have controller firmware version 05.30.xx.xx or higher. ======================================================================= 2.0 Installation and Setup Instructions ----------------------------------------- Note: The web-download Storage Manager version 10.36 host software package must be first unpacked (unzipped) into a user-defined directory. Then, go to this directory, locate the Windows directory to access the Storage Manager version 10.36 Controller Firmware upgrade tool and the version 10.36 host software installer wizard. 2.1 Step-by-step instructions for this code update are as follows ------------------------------------------------------------------ 1. Install and update the device driver for the IBM FAStT, FC-2, FC2-133 single port or dual port, FC 4Gbps PCIx single port or dual port, or Qlogic 4Gb FC PCIe for IBM System X Fibre Channel Host Bus Adapters. a. Install the hardware by using the instructions that come with the adapter. b. Review section 3.2 in this readme file for the minimum recommended device driver version for your Fibre Channel Host Bus Adapters. c. Install the IBM DS4000 Host Adapter device driver by using the instructions provided in the readme.txt file located in either the Host_Adapter directory on this installation CD or from the appropriate driver package that is downloaded from the IBM Support Web site. 2. If there is previous version 7.x, 8.x or 9.10 of the IBM DS4000 storage manager host software installed in the system, you have to uninstall it first before installing the new version of the storage manager host software. IMPORTANT: For servers with boot LUNs in the DS4000 storage subsystems (aka. SAN Boot or Root Boot), a special utility in the RDAC_UninstallUtil_for_BootFromSANConfigurations directory must be run first before Uninstalling the RDAC, especially in the following server configuration - W2K server with DS4000 Storage Manager 8.4 RDAC installed. Please refer to the README in the RDAC_UninstallUtil_for_BootFromSANConfigurations directory for instructions on running the utility. NOTE: This utility can also be used to recover from a failed uninstalling of the RDAC in non-SAN boot Microsoft Windows environments which resulted in a failed reboot of the Windows operating system. For instruction to uninstall the DS4000 storage manager host software, please refer to the IBM System Storage DS Storage Manager Version 10 Installation and Host Support Guide. If the previously installed DS4000 storage manager version is of 10 or later, the DS4000 storage manager host software can be updated with the new code from the installer without the need of uninstalling the existing storage manager host software packages first. Just click "Yes" in the window that the installer displays, stating that there are already installed DS4000 storage manager host software in the server and whether you want to update it with the new code. 3. Install the new storage manager host software from the appropriate CD-ROM directory for your Operating Systems or from the host software package that you downloaded from the IBM Support Web site. Refer to the IBM System Storage DS Storage Manager Version 10 Installation and Host Support Guide for detailed installation instructions. 4. Upgrade the DS4000/DS5000 storage subsystem firmware in the following order - 1. Controller firmware and NVSRAM 2. ESM firmware 3. Drive firmware Refer to the IBM System Storage DS Storage Manager Version 10 Installation and Host Support Guide or the online help in the Subsystem Management window for detailed instructions. ATTENTION: Always check the README files (especially the Dependencies section) that are packaged together with the firmware files for any required minimum firmware level requirements and the firmware download sequence for the DS4000/DS5000 drive expansion enclosure ESM, the DS4000/DS5000 storage subsystem controller and the hard drive firmware. 5. (if applicable) Re-enable the FC/SATA intermix premium feature using the premium key file. Refer to the http://www.ibm.com/servers/storage/support/disk IBM System Storage™ Disk Storage Systems Technical Support web site for the the latest DS Storage Manager host software, the DS4000/DS5000 controllers firmware, the drive expansion enclosure ESM firmware and the hard disk drive code. ======================================================================= 2.2 Refer to the Host_Adapter directory on the installation CD for the applicable drivers. Refer to the http://www.ibm.com/servers/storage/support/disk IBM System Storage™ Disk Storage Systems Technical Support web site for the latest supported host adapters, device drivers, and updated readme. ======================================================================= 2.3 Helpful Hints ------------------ 1. The DS4500 and DS4300 storage subsystem have updated recommended drive-side cabling instructions. The DS4500 instructions are documented in the IBM System Storage DS4500 Installation, Users. and Maintenance Guide (GC27- 2051-00 or IBM P/N 42D3302). The DS4300 instructions are documented in the IBM System Storage DS4300 Installation, Users. and Maintenance Guide (GC26-7722-02 or IBM P/N 42D3300). Please follow the cabling instructions in these publication to cable the new DS4500 and DS4300 setup. If you have an existing DS4500 setup with four drive side minuhub installed that was cabled according to the previously recommended cabling instructions, please schedule down time as soon as possible to make changes to the drive side FC cabling. Refer to the IBM System Storage DS4500 and DS4300 Installation, Users. and Maintenance Guide for more information. 2. If you are unable to see the maximum number of drives during Automatic Configuration, you should be able to use Manual Configuration to select individual drives and select the maximum number of drives allowed. 3. Depending on the storage subsystem that you have purchased, you may have to purchase the DS4000 storage partitioning premium feature option or an option to upgrade the number of supported partitions in a storage subsystem. Please see IBM Marketing representatives or IBM resellers for more information. - IBM DS4100 storage subsystem (machine type 1724): The standard and single controller configuration does not have the DS4000 storage partitioning premium enabled. Four partition, eight partition, sixteen and an upgrade from four to eight partition storage partitioning premium feature options can be purchased. - IBM DS4200 storage subsystem (machine type 1814): Depending on the ordering channels, the DS420 storage subsystem is either shipped with 2 storage partitions or with a user selected 2, 4, 8, 16 or 64 storage partitions. If the DS4200 storage subsystem is ordered with less than 64 partitions, various storage partition feature upgrade options can be purchased to increase the maximum number of supported storage partitions. - IBM DS4300 storage subsystem (machine type 1722): The standard configuration does not have the DS4000 storage partitioning premium enabled. Four partition, eight partition, sixteen and an upgrade from four to eight partition storage partitioning premium feature options can be purchased. The IBM DS4300 Turbo option comes with 8 partition storage partitioning premium option installed. An upgrade to 64 partitions can be purchased for the IBM DS4300 Turbo option. - IBM FAStT200 (machine type 3542: The standard configuration has 16 partition storage partitioning premium option installed. No additional storage partitioning premium feature options can be purchased for these storage subsystems. - IBM FAStT500 and DS4400 storage subsystems (machine type 3552 and 1742 - models 1RU and 1RX, respectively): The standard configuration has 64 partition storage partitioning premium option installed. No additional storage partitioning premium feature options can be purchased for these storage subsystems. - IBM DS4500 storage subsystem (machine type 1742 - models 90X and 90U): The standard configuration has 16 partition storage partitioning premium option installed. An upgrade from 16 to 64 partition storage partitioning premium feature option can be purchased. - IBM DS4700 storage subsystem (machine type 1814): Depending on the ordering channels, the DS4700-model 70 storage subsystem is either shipped with 2 storage partitions or with a user selected 2, 4, 8, 16, 32, 64 or 128 storage partitions. Similarly, the DS4700-model 72 storage subsystem is either shipped with 8 storage partitions or with a user selected 8, 16, 32, 64 or 128 storage partitions. If the DS4700 storage subsystem is ordered with less than 128 partitions, various storage partition feature upgrade options can be purchased to increase the maximum number of supported storage partitions. - IBM DS4800 storage subsystem (machine type 1815): Depending on the ordering channels, the DS4800 storage subsystem is either shipped with 8 storage partitions or with a user selected 8, 16, 32, 64, 128, 256 or 512 storage partitions. If the subsystem is ordered with less than 512 partitions, an upgrade from 8 to 16, 8 to 32, 8 to 64, 16 to 32, 16 to 64, 32 to 64, 32 to 128, 64 to 128, 64 to 256, 128 to 256, 128 to 512, or 256 to 512 partition storage partitioning premium feature option can be purchased. - IBM DS5300 and DS5100 storage subsystem (machine type 1818): the DS5300 and DS5100 storage subsystem is shipped with a user selected 8, 16, 32, 64, 128, 256 or 512 storage partitions. If the subsystem is ordered with less than 512 partitions, various storage partition feature upgrade options can be purchased to increase the maximum number of supported storage partitions. 4. Do not delete the Access LUN or Access Volume. The Access LUN is required by the SMClient to communicate with the storage controllers when using the in-band management method. 5. The DS4000 controller host ports or the Fibre Channel HBA ports can not be connected to a Cisco FC switch ports with "trunking" enable. You might encounter failover and failback problems if you do not change the Cisco FC switch port to "non-trunking" using the following procedure: a. Launch the Cisco FC switch Device Manager GUI. b. Select one or more ports by a single click. c. Right click the port(s) and select Configure, a new window pops up d. Select the "Trunk Config" tab from this window, a new window opens e. In this window under Admin, select the "non-trunk" radio button, it is set to auto by default. f. Refresh the entire fabric. 6. When making serial connections to the DS4000 storage controller, the baud rate is recommended to be set at either 38200 or 57600. Note: Do not make any connections to the DS4000 storage subsystem serial ports unless it is instructed by IBM Support. Incorrect use of the serial port might result in lost of configuration, and possibly, data. 7. Fabric topology zoning requirement. To avoid possible problem at the host level, it is best practice that all Fibre Channel (FC) Switches must be zoned such that a single FC host bus adapter can only access one controller per storage array. In addition, this zoning requirement also ensures the maximum number of host connections can be seen and log into the controller FC host port. This is because if a FC HBA port is seen by both controller A and B host ports, it will be counted as two host connections to the storage subsystem - one for controller A port and one for controller B port. Note: The DS4000 storage subsystems DS4500, DS4400 and FAStT500 (IBM machine type 1742 and 3552) have two ports per controller - one per minihub slot. The DS4000 storage subsystems DS4300 (IBM machine type 1722) and DS4100 (IBM machine type 1724) have two ports per controller. The DS4000 storage subsystem FAStT200 (IBM machine type 3542) has only one port per controller. The DS4800 storage subsystem (IBM machine type 1815) has four ports per controller. 8. All enclosures (including DS4000 storage subsystem with internal drive slots) on any given drive loop/channel should have complete unique ID's, especially the single digit (x1) portion of the ID, assigned to them. For example, in a maximum configured DS4500 storage subsystem, enclosures on one redundant drive loop should be assigned with id's 10-17 and enclosures on the second drive loop should be assigned with id's 20-27. Enclosure id's with the same single digit such as 11, 21 and 31 should not be used on the same drive loop/channel. In addition, for enclosures with mechanical enclosure ID switch like DS4300 storage subsystems, EXP100 or EXP710 storage expansion enclosures, do not use enclosure ID value of 0. The reason is with the physical design and movement of the mechanical enclosure ID switch, it is possible to leave the switch in a “dead zone” between ID numbers, which return an incorrect enclosure ID to the storage management software. The most commonly returned enclosure ID is 0 (zero). In addition to causing the subsystem management software to report incorrect enclosure ID, this behavior also result in enclosure ID conflict error with the storage expansion enclosure or DS4000 storage subsystem intentionally set the ID to 0. The DS4200 and DS4700 storage subsystems and the EXP420 and EXP810 storage expansion enclosures did not have mechanical ID switches. Thus, they are not susceptible to this problem. In addition, these storage subsystems and storage expansion enclosures automatically set the Enclosure IDs. IBM recommendation is not make any changes to these settings unless the automatic enclosure ID settings resulting in non- unique single digit settings for enclosures (including the storage subsystems with internal drive slots) in a given drive loop/channel. 9. The ideal configuration for SATA drives is one drive in each EXP per array, one logical drive per array and one OS disk partition per logical drive. This configuration minimizes the random head movements that increase stress on the SATA drives. As the number of drive locations to which the heads have to move increases, application performance and drive reliability may be impacted. If more logical drives are configured, but not all of them used simultaneously, some of the randomness can be avoided. SATA drives are best used for long sequential reads and writes. 10. IBM recommends at least one hot spare per EXP100 drive expansion enclosure. A total of 15 hot-spares can be defined per DS4000 storage subsystem configuration. 11. Starting with the DS4000 Storage Manager (SM) host software version 9.12 or later, the Storage Manager client script window looks for the files with the file type of ".script" as the possible script command files. In the previous versions of the DS4000 Storage Manager host software, the script window looks for the file type ".scr" instead. (i.e. enableAVT.script for SM 9.12 or later vs. enableAVT.scr for pre-SM 9.12) 12. When you configure a LUN from the DS4000 storage subsystem as a boot device, the system displays a blue screen and does not respond when it is manually or automatically set to hibernate. If you use a LUN in the DS4000 storage subsystem as a boot device for Windows Server 2003, you cannot enable the hibernation feature. To ensure that the hibernation feature is disabled, complete the following steps: a. Select Start >> Settings >> Control Panel >> Power Options. b. Select the Hibernate tab. IMPORTANT: If the Hibernate tab does not appear in this dialog, then your system does not support hibernate. No additional action is required. c. Is the Enable Hibernate Support check box selected? | Yes – Unselect the check box, select Apply, and then go to step d. | No – Go to step d. d. Select the Power Schemes tab. e. From the Turn Off Hard Disks drop-down menu, select Never. f. Select OK. 13. (Windows Server 2003) Cluster resources might fail on a host after rebooting if the "Failback immediately" option is checked in the Microsoft Cluster Server software. With this option checked, you might see failed resources or devices not associated with their preferred node. The current workaround is to make sure that the "Prevent failback" option is checked under Group Properties. This is the default option. Do not use the "Failback immediately" option. 14. (Windows 2000) In a Microsoft Cluster Server (MSCS) environment configured with VERITAS DMP, rebooting a server node owning the resources might take a long time (10 to 15 minutes). It is possible that the long server boot time might cause some Windows delayed write failures. The workaround is to move all the resources from the server node you are planning to reboot to another node before rebooting. 15. (Windows Server 2003) When in a server cluster environment, a failed disk in the storage subsystem does not show as failed in the Cluster Administrator. The host still receives I/O errors, and the disk is shown as failed in the storage management software. This is a known issue with the Windows Server 2003 operating system. Choose one of the following workarounds: • Workaround 1 – Reboot the host that owns the disk resource. The Cluster Administrator should now show the proper state of the disk resource. • Workaround 2 – Change the ownership of the disk resource to a different node in the server cluster configuration. ======================================================================= 3.0 Configuration Information ----------------------------- 3.1 Configuration Settings -------------------------- 1. For the Microsoft Windows servers in MSCS configuration, the IBM DS4000 FC2, FC2-133 single or dual port and FC 4Gbps single or dual port FC HBA adapter "Port Down Retry Count" BIOS parameter must be change to 70 from the default of 30. You can either use the Qlogic SANsurfer (aka. FAStT Management Suite Java (FAStT MSJ)) program or the FC HBA Fast!UTIL program to change the setting in 32bit or X64 64bit servers. To invoke the Fast!UTIL program, perform the following steps: 1. Reboot the server 2. Press when the statement "Press for Fast!UTIL " is displayed when the server scan the FC-133 adapter during boot to get invoke the Fast!UTIL program. 3. If there are multiple FC2-133 HBAs in your server, a list of the HBAs will be displayed. Select the appropriate HBA and press enter to get to the Fast!Util Options menu. Then, select the Configuration Settings menu option followed by Advanced Adapter Settings menu option to display the menu that the Port Down Retry Count parameter is displayed. Select the parameter and press enter to edit the new value. 4. Press ESC twice to get to the "Save setting" menu. Select appropriate option to save the settings and return to the Fast!UTIL Options menu. You can either select another HBA for modification or press ESC and select Reboot System when you are prompted. Alternatively, you can also use the Qlogic SANsurfer program to modify the setting from the Microsoft Windows operating system environment. This is also the recommended method to change NVSRAM setting in Intel Itanium II 64bit (IA64) servers. However, you must reboot the servers for the changes to become effective. In addition, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Disk registry value must be increased to 120 from the default setting of 60. A utility, SMRegUpdate.reg, is provided in the SMUtil host software package to facilitate this registry change. The QLogic SANsurfer program can be downloaded from the DS4000 System Storage support web site. 2. If a host in a cluster server configuration lost a physical path to a DS4000 storage subsystem controller, the logical drives that are mapped to the cluster group will periodically failover and then failback between cluster nodes until the failed path is restored. This behavior is the result of the automatic logical drive failback feature of the RDAC multipath driver. The cluster node with a failed path to a DS4000 controller will issue a failover command of all logical drives that were mapped to the cluster group to the controller that it can access. After a programmed interval, the nodes that did not have failed path will issue failback command for the logical drives because they can access the logical drives both controllers, resulting in the cluster node with the failed path not be able to access certain logical drives. This cluster node will then issue a failover command for all logical drives, repeating the logical drives failover-failback cycle. The workaround is to disable this automatic failback feature. For Windows, change the DisableLunRebalance registry setting of the [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\rdacdisk\Parameters] registry key from 0 to 3 in each cluster node. Then, reboot each node for the changes to take effect. 3. By default, the IBM DS4000 Storage Manager 8.3 and higher firmware does not automatically map logical drives when the IBM DS4000 storage partitioning premium feature is enabled. This means that the logical drives after being created are not automatically presented to the host systems. a. For a new installation, after creating new arrays and logical drives, create a storage partition with the host type of Windows 2000/Server 2003 non-clustered or Windows 2000/Server 2003 clustered and map the logical drives to this partition. b. If you are upgrading the NVSRAM with Storage Partitions, you may have to change the default host type to match the host system OS. After upgrading the NVSRAM, the default host type is reset to Windows 2000/Server 2003 non-clustered for DS4000 storage subsystem with controller firmware version 06.14.xx.xx or later. For DS4000 storage server with controller firmware version 06.12.xx.xx or earlier, it is reset to Windows non-clustered (SP5 or higher), instead. Refer to the IBM DS4000 Storage Manager online help to learn more about creating storage partitions and changing host types. 4. Running script files for specific configurations. Apply the appropriate scripts to your subsystem based on the instructions you have read in the publications or any instructions in the operating system readme file. A description of each script is shown below. - SameWWN.script: Setup RAID controllers to have the same World Wide Names. The World Wide Names (node) will be the same for each controller pair. The NVSRAM default sets the RAID controllers to have the same World Wide Names. - DifferentWWN.script: Setup RAID controllers to have different World Wide Names. The World Wide Names (node) will be different for each controller pair. The NVSRAM default sets the RAID controllers to have the same World Wide Names. - EnableAVT_W2K_S2003_noncluster.script: The script will enable automatic logical drive transfer (AVT/ADT) for the Windows 2000/Server 2003 non- cluster heterogenous host region. The default setting is to disable AVT for this heterogenous host region. This setting is one of the requirements for setting up the remote boot or SAN-boot. Do not use this script unless it is specifically mentioned in the applicable instructions. (This script can be used for other host type if modifications are made in the script, replacing the Windows 2000/Server 2003 non-cluster host type with the appropriate host type that needs to have AVT/ADT enabled) - DisableAVT_W2K_S2003_noncluster.script: The script will disable the automatic logical drive transfer (AVT) for the Windows 2000/Server 2003 non-cluster heterogenous host region. This script will reset the Windows 2000/Server 2003 non-cluster AVT setting to the default. (This script can be used for other host type if modifications are made in the script, replacing the Windows 2000/Server 2003 non- cluster host type with the appropriate host type that needs to have AVT/ADT disabled) 6. When you are configuring IBM machine type 1722, 1724, 1742, 1814, 1815 or 3552 storage subsystems in host cluster Remote Mirror configurations, contact IBM support for supported host cluster configurations and instructions for configuring IBM storage controllers in clustered Remote Mirror configurations. ======================================================================= 3.2 Hardware status and information ----------------------------------- IBM Fibre Channel Host Bus Adapter ---------------------------------- New installations for IBM Machine types 1722, 1724, 1742, 1814, 1815, 1818, 3552, and 3542 (DS4100, DS4200, DS4300, DS4400, DS4500, DS4700, DS4800, DS5100, DS5300, FAStT500 and FAstT200) should be installed with either the IBM DS4000 FC2-133, the FC4Gb PCIx single/dual port Host Bus Adapter (39M5894/39M5895), the QLogic 4Gb FC Single/Dual-Port PCIe for IBM System X (39R6525/39R6527), the Qlogic 8Gb FC Single/Dual-Port PCIe HBA for IBM System X (42D0501/42D0510),the Emulex 4Gb FC PCIx Host Bus Adapter for IBM System X (42D0405/42D0407), the Emulex 4Gb FC PCIe Host Bus Adapter for IBM System X (42C2069/42C2071), or the Emulex 8Gb FC Single/Dual-Port PCIe HBA for IBM System X (42D0485/42D0494). The supported BIOS and device driver for each type of Fibre Channel HBA by DS4000/DS5000 storage subsystem models are listed below: ---------------------------------------------------------------------------- | DS4000 | FC-2 | FC2-133 single| FC 4Gbps PCIx | Qlogic 8Gbps | | Storage | Device Driver | & dual port | single/dual | FC Single/Dual| | Subsystem | | | port, Qlogic | port PCIe HBA | | (controller| | Device Driver | FC 4Gb PCIe | for | | (fw vers.) | | | Single/Dual | IBM System X | | fw vers.) | | | Port Device | Device Driver | | | | | Driver | | ---------------------------------------------------------------------------- |DS5300 | | | | | |(7.36.xx.xx)| 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | ---------------------------------------------------------------------------- |DS5100 | | | | | |(7.36.xx.xx)| 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | ---------------------------------------------------------------------------- |DS4800 | 9.1.4.10 SCSI | 9.1.4.10 SCSI | 9.1.4.10 SCSI | | |(7.36.xx.xx)| 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | ---------------------------------------------------------------------------- |DS4700 | 9.1.4.10 SCSI | 9.1.4.10 SCSI | 9.1.4.10 SCSI | | |(7.36.xx.xx)| 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | ---------------------------------------------------------------------------- |DS4500 | 9.1.4.10 SCSI | 9.1.4.10 SCSI | 9.1.4.10 SCSI | | |(6.60.xx.xx)| 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | ---------------------------------------------------------------------------- |DS4400 | 9.1.4.10 SCSI | 9.1.4.10 SCSI | 9.1.4.10 SCSI | | |(6.12.56.xx)| 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | ----------------------------------------------------------------------------- |DS4300 Turbo| 9.1.4.10 SCSI | 9.1.4.10 SCSI | 9.1.4.10 SCSI | | |(6.60.xx.xx)| 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | ---------------------------------------------------------------------------- |DS4300 Dual | 9.1.4.10 SCSI | 9.1.4.10 SCSI | 9.1.4.10 SCSI | | |(6.60.xx.xx)| 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | ---------------------------------------------------------------------------- |DS4200 | 9.1.4.10 SCSI | 9.1.4.10 SCSI | 9.1.4.10 SCSI | | |(7.36.xx.xx)| 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | ---------------------------------------------------------------------------- |DS4100 | 9.1.4.10 SCSI | 9.1.4.10 SCSI | 9.1.4.10 SCSI | | |(6.12.56.xx)| 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | 9.1.7.16 STOR | ----------------------------------------------------------------------------- Support device driver versions for each type of FC HBA by DS4000/DS5000 storage subsystem model Note: "SCSI" and "STOR" are used to indicate the Microsoft miniport model that the device driver is based on. The Microsoft Windows Server 2003 - X64 edition operating system supports only device drivers based on STORport miniport device driver model. ---------------------------------------------------------------------------- |DS4000 | FC-2 | FC2-133 single | FC 4Gbps PCIx | Qlogic 8Gbps | |Storage | | & dual port | single&dual port | FC Single/Dual | |Subsystem | | |QLogic FC 4Gb PCIe| port PCIe HBA | | | | |Single/Dual-Port | for | IBM System X | |---------------------------------------------------------------------------- |DS5300 | BIOS 1.54 | BIOS 1.54 | BIOS 2.02 | BIOS 2.02 | | | | EFI driver 1.50 | EFI driver 2.00 | EFI driver 2.00| ---------------------------------------------------------------------------- |DS5100 | BIOS 1.54 | BIOS 1.54 | BIOS 2.02 | BIOS 2.02 | | | | EFI driver 1.50 | EFI driver 2.00 | EFI driver 2.00| ---------------------------------------------------------------------------- |DS4800 | BIOS 1.54 | BIOS 1.54 | BIOS 2.02 | BIOS 2.02 | | | | EFI driver 1.50 | EFI driver 2.00 | EFI driver 2.00| ---------------------------------------------------------------------------- |DS4700 | BIOS 1.54 | BIOS 1.54 | BIOS 2.02 | BIOS 2.02 | | | | EFI driver 1.50 | EFI driver 2.00 | EFI driver 2.00| ---------------------------------------------------------------------------- |DS4500 | BIOS 1.54 | BIOS 1.54 | BIOS 2.02 | BIOS 2.02 | | | | EFI driver 1.50 | EFI driver 2.00 | EFI driver 2.00| ---------------------------------------------------------------------------- |DS4400 | BIOS 1.54 | BIOS 1.54 | BIOS 2.02 | BIOS 2.02 | | | | EFI driver 1.50 | EFI driver 2.00 | EFI driver 2.00| ----------------------------------------------------------------------------- |DS4300 | BIOS 1.54 | BIOS 1.54 | BIOS 2.02 | BIOS 2.02 | | | | EFI driver 1.50 | EFI driver 2.00 | EFI driver 2.00| ---------------------------------------------------------------------------- |DS4200 | BIOS 1.54 | BIOS 1.54 | BIOS 2.02 | BIOS 2.02 | | | | EFI driver 1.50 | EFI driver 2.00 | EFI driver 2.00| ---------------------------------------------------------------------------- |DS4100 | BIOS 1.54 | BIOS 1.54 | BIOS 2.02 | BIOS 2.02 | | | | EFI driver 1.50 | EFI driver 2.00 | EFI driver 2.00| ----------------------------------------------------------------------------- Support BIOS(EFI driver) version for each type of FC HBA by DS4000/DS5000 storage subsystem model For more information on the latest support FC HBA device driver and BIOS (or EFI driver), refer to the IBM Support Web site. Emulex Fibre Channel Host Bus Adapter ------------------------------------- --------------------------------------------------------------------------- | DS4000 | LP90XX | LP1000x | LP1100x | LPe1200x | | Storage | Device | Device | Emulex 4Gb FC PCIx| Emulex 8Gb FC | | Subsystem | Driver | Driver | Emulex 4Gb FC PCIe| PCIe for IBM | |(controller | | | for IBM System X | System X | | fw vers.) | | | Device Driver | Device Driver | --------------------------------------------------------------------------- |DS5300 | | | | | |7.36.xx.xx) | 2.01A4 STOR| 2.01A4 STOR | 2.01A4 STOR | 2.01A4 STOR | --------------------------------------------------------------------------- |DS5100 | | | | | |(7.36.xx.xx)| 2.01A4 STOR| 2.01A4 STOR | 2.01A4 STOR | 2.01A4 STOR | --------------------------------------------------------------------------- |DS4800 | 5.30A2 SCSI| 5.30A2 SCSI | 5.30A2 SCSI | | |(7.36.xx.xx)| 2.01A4 STOR| 2.01A4 STOR | 2.01A4 STOR | 2.01A4 STOR | --------------------------------------------------------------------------- |DS4700 | 5.30A2 SCSI| 5.30A2 SCSI | 5.30A2 SCSI | | |(7.36.xx.xx)| 2.01A4 STOR| 2.01A4 STOR | 2.01A4 STOR | 2.01A4 STOR | --------------------------------------------------------------------------- |DS4500 | 5.30A2 SCSI| 5.30A2 SCSI | 5.30A2 SCSI | | |(6.60.xx.xx)| 2.01A4 STOR| 2.01A4 STOR | 2.01A4 STOR | 2.01A4 STOR | --------------------------------------------------------------------------- |DS4400 | 5.30A2 SCSI| 5.30A2 SCSI | 5.30A2 SCSI | | |(6.12.56.xx)| 2.01A4 STOR| 2.01A4 STOR | 2.01A4 STOR | 2.01A4 STOR | ---------------------------------------------------------------------------- |DS4300 Turbo| 5.30A2 SCSI| 5.30A2 SCSI | 5.30A2 SCSI | | |(6.60.xx.xx)| 2.01A4 STOR| 2.01A4 STOR | 2.01A4 STOR | 2.01A4 STOR | --------------------------------------------------------------------------- |DS4300 Dual | 5.30A2 SCSI| 5.30A2 SCSI | 5.30A2 SCSI | | |(6.60.xx.xx)| 2.01A4 STOR| 2.01A4 STOR | 2.01A4 STOR | 2.01A4 STOR | --------------------------------------------------------------------------- |DS4200 | 5.30A2 SCSI| 5.30A2 SCSI | 5.30A2 SCSI | | |(7.36.xx.xx)| 2.01A4 STOR| 2.01A4 STOR | 2.01A4 STOR | 2.01A4 STOR | --------------------------------------------------------------------------- |DS4100 | 5.30A2 SCSI| 5.30A2 SCSI | 5.30A2 SCSI | | |(6.12.56.xx)| 2.01A4 STOR| 2.01A4 STOR | 2.01A4 STOR | 2.01A4 STOR | ---------------------------------------------------------------------------- ======================================================================= 3.3 Unsupported configurations ------------------------------ The following lists configurations that are currently not being supported with IBM DS Storage Manager Version 10.36. 1. The DS4100 (machine type 1724-all models) storage subsystem does not support the attachment of the DS4000 EXP710, EXP700 and EXP500 (FC) drive expansion enclosure. Please contact IBM representatives or resellers for the availability of such support in the future. 2. The DS4800 storage subsystem (machine type 1815-all models) does not support the attachment of the FAStT EXP500 and DS4000 EXP700 drive expansion enclosures. 3. The DS4200 (machine type 1814 - models 7VA/H) with controller firmware 6.16.88.xx installed does not support the attachment of the DS4000 EXP100 (SATA), EXP710 (FC) and EXP810 (SATA and FC) drive expansion enclosures. In addition, it does not support Fibre Channel disk drive options. 4. The IBM DS4000 EXP420 Expansion Enclosure is not supported attached to any other IBM DS4000 Storage Controllers except the DS4200. 5. The DS4100 with Single Controller option does not support the attachment of the DS4000 storage expansion enclosures. 6. The DS4300 storage subsystem with Single Controller option does not support the controller firmware version 06.1x.xx.xx. The correct firmware version for these DS4300 storage subsystem models is 05.34.xx.xx. 7. Fibre Channel loop environments with the IBM Fibre Channel Hub, machine type 3523 and 3534, in conjunction with the IBM Fibre Channel Switch, machine types 2109-S16, 2109-F16 or 2109-S8. In this configuration, the hub is connected between the switch and the IBM Fibre Channel RAID Controllers. 8. The IBM Fibre Channel hub, machine type 3523, connected to IBM machine type 1722, 1724, 1742, 1814, 1815, 3542 and 3552. 9. A configuration in which a server with only one FC host bus adapter connects directly to any DS4000 storage subsystem with dual controllers is not supported. The supported configuration is the one in which the server with only one FC host bus adapter connects to both controller ports of any DS4000 storage subsystem with dual controllers via Fibre Channel (FC) switch (SAN-attached configuration.) 10. The DS5300 and DS5100 storage subsystem (machine type 1818-all models) does not support the attachment of the FAStT EXP500, DS4000 EXP700, DS4000 EXP710, DS4000 EXP100, DS4000 EXP810 or DS4000 EXP420 drive expansion enclosures. 11. The IBM DS5000 EXP5000 Expansion Enclosure is not supported attached to any other IBM Storage Controllers except the DS5300 and DS5100. ======================================================================= 4.0 Unattended Mode ------------------------------- N/A ======================================================================= 5.0 WEB Sites and Support Phone Number -------------------------------------------------------------- 5.1 IBM System Storage™ Disk Storage Systems Technical Support web site: http://www.ibm.com/servers/storage/support/disk/ 5.2 IBM System Storage™ Marketing Web Site: http://www.ibm.com/servers/storage/disk 5.3 You can receive hardware service through IBM Services or through your IBM reseller, if your reseller is authorized by IBM to provide warranty service. See http://www.ibm.com/planetwide/ for support telephone numbers, or in the U.S. and Canada, call 1-800-IBM-SERV (1-800-426- 7378). IMPORTANT: You should download the latest version of the DS Storage Manager host software, the DS4000/DS5000 storage subsystem controller firmware, the DS4000/DS5000 drive expansion enclosure ESM firmware and the drive firmware at the time of the initial installation and when product updates become available. For more information about how to register for support notifications, see the following IBM Support Web page: www.ibm.com/systems/support/storage/subscribe/moreinfo.html You can also check the Stay Informed section of the IBM Disk Support Web site, at the following address: www.ibm.com/systems/support/storage/disk ======================================================================= 6.0 Trademarks and Notices -------------------------- The following terms are trademarks of the IBM Corporation in the United States or other countries or both: IBM System Storage the e-business logo xSeries, pSeries HelpCenter UNIX is a registered of The Open Group in the United States and other countries. Microsoft, Windows, and Windows NT are of Microsoft Corporation in the United States, other countries, or both. Linux is a trademark of Linus Torvalds in the United States, other countries, or both. Java and all Java-based trademarks and logos are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. QLogic and SANsurfer are trademarks of QLogic Corporation. Other company, product, or service names may be trademarks or service marks of others. ======================================================================= 7.0 Disclaimer -------------- 7.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 7.2 Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.