******************************************************************* * IBM EXP3500/DCS3700/EXP3800 ESM Firmware Update * * Version 3.93 * ******************************************************************* (C) Copyright International Business Machines Corporation 1999, 2013. All rights reserved. US Government Users Restricted Rights - Use, duplication, or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Note: Before using this information and the product it supports, read the general information in section 6.0 "Trademarks and Notices" in this document. Last Update: 11/29/2013 Please refer to corresponding Change History document for more information on new features and modifications. 1.0 Overview 2.0 Installation and Setup Instructions 3.0 Configuration Information 4.0 Unattended Mode 5.0 Web Sites and Support Phone Number 6.0 Trademarks and Notices 7.0 Disclaimer 1.0 Overview _____________ 1.1 Overview of this code The IBM EXP3500/DCS3700 ESM update contains ESM firmware updates for the DCS3700 model 80E, EXP3512, and EXP3524-all models storage expansion enclosures. The latest microcode(firmware) level for the EXP3700, EXP3512, EXP3524 ESMs in the DCS3700 model 80E, EXP3512, and EXP3524 storage expansion enclosures, respectively is v3.93. 1.2 Limitations The recommended DS3500, DCS3700 and DCS3860 controller firmware levels for this update is: Model Type Firmware DS3512 (all models) 07.86.32.00 DS3524 (all models) 07.86.32.00 1818 model 80C 07.86.32.00 1818 model 80C Performance Moduel Controller 07.86.32.00 DCS3860 (all models) 07.86.36.01 1.3 Enhancements See corresponding Change History document for more information. 1.4 Level of Recommendation IBM considers this update to be required for all customers who attach the IBM EXP3800 to a DCS3860, DCS3700 model 80E to a DCS3700 and a EXP3500 to a DS3500 Storage Controller Subsystem. The IBM EXP3800 ESM, DCS3700 model 80E and EXP3500 ESM FRU replacements may be at a different ESM firmware version than the surviving ESM in an EXP3800, DCS3700 model 80E and EXP3500. If the replacement ESM is not at the same ESM level as the surviving ESM, the new IBM EXP3800, DCS3700 model 80E and EXP3500 expansion enclosure supports automatic ESM firmware synchronization. When you install a new ESM into an existing EXP3800, DCS3700 model 80E or EXP3500 that is attached to a DCS3860, DCS3700 model 80E or DS3500 storage subsystem that supports automatic ESM firmware synchronization, this feature resolves firmware mismatch conditions by automatically synchronizing the firmware in the new ESM with the firmware in the existing ESM. To enable automatic ESM firmware synchronization: 1. Verify that the EXP3800, DCS3700 model 80E or DS3500 Storage Manager Event Monitor is installed and running. 2. Verify that the DCS3800, DCS3700 model 80C or DS3500 storage subsystem that the expansion is attached to is defined in the Enterprise Management window of the DCS3860/DCS3700-80C/DS3500 Storage Manager client. If the automatic ESM firmware synchronization is not enable, ESM firmware upgrade can be manually initiated via the menu options int he Subsystem Management window. If a replacement ESM is installed and it has a different ESM firmware version then the surviving ESM, the DCS3700 model 80E DS3500 controller will register an ESM hardware or firmware mismatch error in the Recovery Guru. The new ESM will function; but long term operation with a mismatch ESM firmware in a EXP drive expansion enclosure is not recommended. 1.5 Dependencies IMPORTANT: Always check the DCS3860, DCS3700 model 80E or DS3500 storage subsystem controller firmware README for any required minimum version of the attached drive expansion enclosure ESM firmware for that particular controller firmware release. Update the ESM firmware using the DCS3700 model 80E or DS3524 Storage Manager software. Be sure to follow the following list of prerequisites before updating hard disk or ESM firmware. - If multiple storage expansion enclosures are selected for ESM firmware updating at the same time, all IOs activity must also be stopped. If you are unsure about the sequence of firmware updates for various components in the DCS3700 model 80E orDS3500 storage subsystem configuration, please call IBM Support at 1-800-IBM-SERV (1-800-426-7378) before proceeding with the firmware upgrades. ___________________________ 2.0 Installation and Setup ___________________________ Applying updates to the EXP3800, DCS3700 model 80E orEXP3500 using the DS Storage Manager client version v10.86 and later. a) Go to the support tab in the Subsystem Management window and select Download Firmware. b) Select Download ESM Firmware. c) Select the Drive enclosure(s) that are being updated. d) Select the correct ESM firmware file and select Start. NOTE: ESM firmware download should be performed with all IO quiesced. Allow approximately 5-10 minutes per ESM to complete the firmware update. ______________________________ 3.0 Configuration Information ______________________________ There is no special configuration required. _____________________ 4.0 Unattended Mode _____________________ See the appropriate application tools for any possible unattended mode operations. _______________________________________ 5.0 WEB Sites and Support Phone Number _______________________________________ 5.1 IBM System Storage Disk Storage Systems Technical Support web site: http://www.ibm.com/systems/support/storage/disk 5.2 IBM System Storage Marketing Web Site: http://www.ibm.com/systems/support/storage/disk 5.3 IBM System Storage Interoperation Center (SSIC) web site: http://www.ibm.com/systems/support/storage/ssic/ 5.4 You can receive hardware service through IBM Services or through your IBM reseller, if your reseller is authorized by IBM to provide warranty service. See http://www.ibm.com/planetwide/ for support telephone numbers, or in the U.S. and Canada, call 1-800-IBM-SERV (1-800-426- 7378). __________________________ 6.0 Trademarks and Notices __________________________ The following terms are trademarks of the IBM Corporation in the United States or other countries or both: IBM DS3000 DS3500 DCS3700 DCS3860 DS4000 DS5000 FAStT System Storage the e-business logo xSeries pSeries HelpCenter Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States, other countries, or both. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United states, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Linux is a registered trademark of Linus Torvalds. Other company, product, and service names may be trademarks or service marks of others. ________________ 7.0 Disclaimer ________________ 7.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 7.2 Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.