README v3.06 for DM-MPIO Configuration file for IBM RSSM Mar 16, 2012 ---------------------------------------------------------------------------- CONTENTS 1.0 About this README file 1.1 Who should read this README file 1.2 How to get help 2.0 Prerequisites for Multipath Configuration File 3.0 Change History 4.0 Supported IBM Storage Servers 5.0 Installation and Usage. 6.0 Notice 7.0 Trademarks and service marks ----------------------------------------------------------------------------- 1.0 About this README file This README file contains the most recent information about the Red Hat Enterprise Linux Server 5 (RHEL 5) and SUSE(R) Enterprise Linux Server 10/11 (SLES 10/11) DM-MPIO configuration file multipath.conf for IBM BladeCenter S SAS RAID Controller (RSSM) 1.1 Who should read this README file This README file is intended for storage administrators, system programmers, and performance and capacity analysts. The information in this file only applies to customers who run IBM RSSM 1.2 How to get help Go to the following Web site for IBM RSSM support: http://www.ibm.com/systems/support/supportsite.wss/brandmain?brandind=5000020 2.0 Prerequisites for Multipath Configuration File For RHEL 5: - the minimum level required is RHEL 5.2 - the "in-box" kernel-mode device mapper multipath module device-mapper-1.02.24-1.el5 in RHEL 5.2 - the "in-box" userspace multipath-tools device-mapper-multipath-0.4.7-17.el5 in RHEL 5.2 For RHEL 6: - the minimum level required is RHEL 6.1 - the "in-box" kernel-mode device mapper multipath module device-mapper-1.02.62-3.el6 in RHEL 6.1 - the "in-box" userspace multipath-tools device-mapper-multipath-0.4.9-41.el6 in RHEL 6.1 For SUSE 10: - The minimum level required is SLES 10.2 - the "in-box" kernel-mode device mapper multipath module device-mapper-1.02.03-6.14 in SLES 10.2 - the "in-box" userspace multipath-tools multipath-tools-0.4.7-34.38 in SLES 10.2 For SUSE 11: - The minimum level required is SLES 11 - the "in-box" kernel-mode device mapper multipath module device-mapper-1.02.27-8.6 in SLES 11 - the "in-box" userspace multipath-tools multipath-tools-0.4.8-40.1 in SLES 11 3.0 Change History v3.01: First version for IBM RSSM support. V3.02: change "no_path_retry" parameter from "fail" to "queue" for RSSM V3.03: 3.03 is used for SLES10 only. V3.04: 3.04 is used for SLES11 only. V3.05: 3.05 is used for RHEL5.7 only. V3.06: 3.06 is used for RHEL6.1 only. 4.0 Supported IBM storage Servers IBM RSSM 5.0 Installation and Usage The file needs to be copied into the "/etc" directory. Make a backup of any existing /etc/multipath.conf before copying in this file. If this file is copied to the "/etc" directory after the device mapper multipath driver and multipath-tools daemon are started, you will have to run the "multipath" command from the command line to reload the settings from the multipath.conf file. 6.0 Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services,or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries,in writing, to: IBM World Trade Asia Corporation Licensing 2-31 Roppongi 3-chome, Minato-ku Tokyo 106, Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND,EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation Information Enabling Requests Dept. DZWA 5600 Cottle Road San Jose, CA 95193 U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM License Agreement for Non-Warranted Programs. Any performance data contained herein was determined in a controlled environment. Therefore, the results obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurement may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. 7.0 Trademarks and service marks The following terms are trademarks of the International Business Machines Corporation in the United States,other countries, or both: AIX AS/400 Enterprise Storage Server HACMP/6000 IBM IBM logo iSeries Netfinity NetVista Operating System/400 pSeries RS/6000 RSSM Seascape SP System/360 System/370 System/390 The eServer logo TotalStorage Versatile Storage Server xSeries zSeries z/Architecture z/OS Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation. Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Other company, product, and service names may be trademarks or service marks of others. --------------------------------------------------------------------- (C) Copyright IBM Corporation 2000, 2002, 2003, 2004, 2005. All rights reserved.