TS3100/TS3200 LTO3 Drive Readme File:

Files in this download contain Licensed Materials, property of IBM,
(C) Copyright IBM Corp. 1998-2010.  All Rights Reserved.  See the 
Licensing agreement presented when the driver is downloaded or see it
at: http://www-947.ibm.com/systems/support/machine_warranties/machine_code.html

IBM periodically releases firmware updates that are intended to, 
among other things, increase overall reliability, improve tape handling, 
further reduce any possibility of data loss/data error, and provide continued 
enhancements to diagnostic capabilities. 

The readme files contain information that may not be included in the IBM
Tape Library documentation. The readme files take precedence over the documentation.  
Therefore, any information in this file that conflicts with information 
in the documentation will supercede the SOSG.

In order to provide maximum performance and reliability, it is recommended that the latest 
version of microcode is installed on your IBM LTO tape devices.These firmware updates are 
intended to, among other things, increase overall reliability, improve tape handling, further 
reduce any possibility of data errors, and provide continued enhancements to diagnostic
capabilities.

LTO3 drives have two configurations, non V2 and V2. V2 drives can be identified through the web 
interface. See LTO3 Features and Notices below. 

CODE LEVEL NAMING CONVENTIONS FOR HALF HIGH DRIVES (non V2 configuration ):
===========================================================================

Format: FF_YRMODYV_FVER.ro

FF       : the form Factor(Full High-rf,Half High-rh)
YRMODY   : the date (yr,month, day) 
V        : the version 
FVER     : the firmware version

Example:rf090316v_93GP.ro
Form Factor     : rf- Full High
Date            : 090316 , 09/03/16
Version         : v 
Firmware Version: 93GP 
 

CODE LEVEL NAMING CONVENTIONS FOR HALF HIGH DRIVES (V2 configuration):
==========================================================================

Format: GENE_FVER_CON_FF_ro

GENE    : the drive generation (LTO3 for Ultrium 3)
FVER    : the firmware version
CON     : the connection type (SAS (SAS), Fibre (FC))
FF      : the form factor (Full High- fh, Half High - hh)

Example:LTO3_D8D5.SAS.hh.ro
Generation: LTO3
Firmware Version: D8D5 
Connection Type: SAS
Form Factor: Half High (hh)



SUPPORTED OPERATING SYSTEMS:
This tape drive works with the following operating systems: AIX, HPUX, Linux, 
Solaris, Windows, i5OS. For details on supported tape attachment please refer to the 
System Storage Interoperation Center website.  

http://www.ibm.com/systems/support/storage/config/ssic/


TROUBLESHOOTING:
IBM Tape Diagnostic Tool (ITDT) provides the customer with functionality 
to perform maintenance tasks and run diagnostic tasks to determine tape 
device issues.  This is available to download with the device driver.

===================================================================================================

LTO3 FEATURES AND NOTICES:
- Features IBM Ultrium 3 Tape Drive in Half-High or Full High Form Factor
- Backwards compatible with previous iterations of LTO Ultrium drives
- Physical storage capacity up to 800 GB (2:1 compression) 


Identifing V2 drives through the web interface: 
  There are two paths to identify V2 drives with the navigation pane. The first path
  is through Monitor Library and the second path is through Service Library.
    Path 1:
      1. Select Monitor Library from the navigation pane on the left side of the page.
      2. Select Drive Identity to display all drives identified within the library.
      3. Specific drive information will be displayed for each drive identified. 
      4. Refer to the Version number to determine which type of drive is installed.
         The number 2 represents a V2 drive.
    Path 2:
      1. Select Service Library from the navigation pane on the left side of the page.
      2. Select Upgrade Firmware. This will display all drives within the library.
      3. Each drive type is identified in the blue highlighted banner.
      4. Text will indicate the drive type with a "V2 " at the end indicating a V2 drive.
         Example: Upgrade Drive 2 (LTO3 HH SAS V2) 


  Ensure you download and install the correct drive firmware.
      • Firmware for the ULT3580-HH3 drive is not compatible with the ULT3580-HH3 V2 drive.
      • Firmware for the ULT3580-HH3 V2 drive is not compatible with the ULT3580-HH3 drive. 

	

Note: Depending if your tape drive is standalone or in a library, will determine what drive code
      should be installed and is supported. See your tape drive fixlist for guidance.