TS4300 Tape Library Fix List =================================================================================================== Firmware Level: 1.1.1.0-A00 Release Date: 11/23/17 =================================================================================================== New Features: - LTO8 tape drive support - Pre-initiialized M8 media is supported with a minimum LTO8 tape drive firmware level of HB82 Fixes: - Fixed problem where user has been logged out from Operator Panel without warning message. - Fixed problem where no data validation was made in Manage Encryption wizard when adding a Signed Certificate - Fixed problem where “Move” button gets an incorrect color when clicked - Fixed incorrect behavior of “Stop Test” button toggles to “Run” button immediately when Library Verify Test is aborted even though test is still processing - Fixed issue with header time not matching Time Zone settings - Fixed typo in Operator Panel drive diagnostics message - Fixed message when no license is installed - Fixed issue where “Retry” button does not refresh in the Management GUI after reboot from FW Upgrade - Fixed unexpected response from REST Interface on invalid IO open request - Fixed issue where Management GUI activity is short time changing to ‘scanning’ and back idle - Fixed issues with Auto Clean - Fixed problem where no event is logged after failure during head test - Fixed problem where wrong result is reported for Library test after Drive test failed - Fixed issue when I/O button is pushed during movement into drive - Fixed issue where no event is logged after drive test failed due to diagnostic cartridge placed into wrong I/O slot - Fixed problem where library status is shown as Upgrading after a failed Upgrade - Improvement of error handling when export of diag cartridge failed and new drive test is started - Improvement of Start Test button by blocking it quickly after starting the test - Improvement of Cartridge and Slots pages by inform which slots belong to I/O stations - Fixed issue where an unhandled exception was thrown when having spooling problems - Improvement for capitalization for text on buttons - Fixed field name for LDAP wizard - Fixed issue where status ‘Magazine removed’ is not reported after powering on the unit with released magazine - Improvement for message shown for incompatible drive error - Fixed problem where library could enter in a loop after a system reboot from Operator Panel - Improvement for event description for Cartridge found in inaccessible slot of lowermost slots - Improvement for incompatible drive event handling - Fixed problems with magazine button behavior in case of emergency stop condition - Fixed occasional inventory scan problem if emergency stop condition occurs during magazine unlock - Improvement for IO Station handling in the case of an Emergency stop during the magazine scan - Fixed Management GUI hang issue during Drive Tests - Fixed magazine button hang condition if pressed while media removal is prevented - Improvement for description of "Drive was hot-removed" event - Fixed issue where Operatop Panel Display initialization was delayed up to 5s after power on - Fixed problem where Wellness test failed on verification of power board instead of power supply - Fixed issue where Magazine can be re-opened while locking - Fixed problem where it was possible to configure not supported drives - Fixed problem where the IO Station was not scanned after moving back into the unit - Fixed problem where Autoclean did not work - Improvement for License file management when non-CRU controller is put into non-CRU chassis - Improvement for Management GUI main menu - Fixed problem where Library Properties screen is shown empty - Fixed problem where Magazine buttons were disabled after release timeout - Fixed issue where empty hostname is not on Operator Panel - Fixed issue where "Library Firmware changed" event was logged in Configuration Log after restoring configuration - Fixed issue where Update button behaves incorrectly in Update Drive Firmware page - Improvement for Reset Internal IP Range by adding a confirmation message - Improvement for Ipv6 validation in Operator Panel - Improvement for Ipv4 validation in Management GUI - Fixed issue where an incorrect error pops up for "Cleaning tape expired" event - Fixed problem where Operator Panel fail when downgrading Library Firmware - Fixed issue where unlocked IO Station LED stops flashing when another IO Station is reinserted - Fixed problem where IO Station handling hangs when a request to open magazine is made - Fixed problem where Magazine is not scanned if delay of inventory scan occurs - Improvement for Remote Logging with a confirmation dialog after navigation from Remote Logging page - Fixed issue where an incorrect error is shown after Drive firmware update completes with Internet Explorer - Improvement for login list when many users are available - Fixed an unexpected unit attention when trying to open Magazine while media removal prevented - Improvement of troubleshooting steps for events 2053 and 2054 - Fixed issue with Kerberos when having users with the same name - Fixed problem to load session after switch from SSL to not SSL - Fixed problem where Personality is missing if system is in Startup Halted State - Fixed incorrect title of Kerberos error popup - Fixed issue where some valid symbols are not allowed in principal name for Kerberos - Fixed issue where some valid symbols used in the realm name caused an "internal Software error" for Kerberos - Fixed problem where deletion of user (principal) containing special chars was not impossible for Kerberos - Fixed problem where Encryption key requests were not handled anymore after SCSI abort - Fixed problem where it was not possible to read encrypted data - Fixed problem where Superuser cannot clear KMIP config - Fixed problem where KMIP certificates were removed from unit after disabling KMIP license =================================================================================================== Firmware Level: 1.1.0.1-A00 Release Date: 08/29/17 =================================================================================================== New Features: - None Fixes: - Fixed problem where Auto login caused a database access error