LTO9 Tape Drive Code Fixlist

===================================================================================================

Drive Code Level: LTO9_P370  (LTO9_FH_FC, LTO9_FH_SAS)

Fixes:
===================================================================================================

Fix race condition during ADI initialization 
Fix drive reset when HRTD is not complete and RAO has a large number of UDSes
Fix multi-initiator handling
Fix Motion Meters in Density information
Fix criteria values of TapeAerts for media EOL
ERP improvements - See CMVC for details
Fix WORM Tampering error when no HKDS is read on load
Fix Read command timeout condition
Improve error reporting in some cases
Fix Locate/Space failure
Add simple write retry for FSC 7340
Fix Read failure during ERP
Change ASC ASCQ to 3/3002 when LTO7 is inserted
Fix Write Append error case
Fix drive incorrect write error reporting
Fix MTR error condition
Fix Read error FSC 6353
Add detection, invalidation and rejection of bad "refurbished" media - Report FSC 2C40
Prevent TDS initialization during MTR
Fix TDS initialization for new LTO9 WORM
Fix Read error when invalid tape directory
Fix Unload command case when tape is unthreaded
Fix drive hang case related to library command
Fix drive panic case during ERP
Fix Read failure at BOW when tape dir is invalid
Fix wrong EOD reporting
ERP improvements
Fix unresponsive media TDS initialization
Fix long unload time with full length LTU
Fix reposition timeout
Fix density code reporting in MAM attribute 0500h
Fix port 1 activity LED
Improve cartridge initialization time
Implement E_12VPC mode support
Fixed when LP17 is updated to after load completes
Fix order of MAM attributes in response to READ_ATTRIBUTE command service action 5
Defined new media wear indicator & capacity counters in log page 17h
Fix handling of case when Write was aborted after status sent





===================================================================================================

Drive Code Level: LTO9_NCA0  (LTO9_FH_FC, LTO9_FH_SAS)

Fixes:
===================================================================================================

Fix Cleaning LED behavior
Fix TapeAlert 35 behavior
Fix media characterization errors in MAM attributes
Fix media characterization for L9 WORM media
Improved logging
Blink tape and ready LED in 5Hz during TDS calibration
Suppress the FSC 7410 when read/reposition command is issued
Fix multi-initiator handling




===================================================================================================

Drive Code Level: LTO9_N9B0  (LTO9_FH_FC, LTO9_FH_SAS)

Fixes:
===================================================================================================

ERP improvements
Display 'c' during charcterization for brand new tape
Enable visibility of media characterization via MAM attributes
Fix timing bug in returning GOOD status during LOAD operation before load is completed and 6/2800 UA is generated
Fix bug causing green LED blinking after load has completed
Fix write error case when target LPOS is not valid (FSC 7475)
Fix cases where a drive dump may get corrupted
Fix Archive Mode unload trigger when unload to hold position
Improve thermal sensor range triggers (TA35)
Fix high-tention motion meters counter