LTO8 Tape Drive Code Fixlist: ===================================================================== Drive Code Level: LTO8_P381 (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- Fix race condition during ADI initialization  Fix Read failure during ERP Fix Write Append error case Fix drive incorrect write error reporting Fix MTR error condition Fix Read error FSC 6353 Add detection, invalidation and rejection of bad "refurbished" media - Report FSC 2C40 Fix Read error when invalid tape directory Fix drive hang case related to library command Fix drive panic case during ERP Fix Read failure at BOW when tape dir is invalid Fix wrong EOD reporting ERP improvements Fix long unload time with full length LTU Fix reposition timeout Fix port 1 activity LED Improve cartridge initialization time Implement E_12VPC mode support Fixed when LP17 is updated to after load completes Fix order of MAM attributes in response to READ_ATTRIBUTE command service action 5 Defined new media wear indicator & capacity counters in log page 17h Fix handling of case when Write was aborted after status sent ===================================================================== Drive Code Level: LTO8_N9M1 (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- Fix reel motor stall at direction change (FSC 58D1) ERP improvements Fix WORM Tampering error when no HKDS is read on load Improve error reporting in some cases Fix Read command timeout condition Fix Locate/Space failure Fix error causing SAS frame processing to stop Improve LTU in certain ERP cases in HH Fix cases where a drive dump may get corrupted Fix multi-initiator handling Suppress the FSC 7410 when read/reposition command is issued ===================================================================== Drive Code Level: LTO8_N4Q1 (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- Improved error handling during unload (FSC 6000) Fix and enhancements for repositioning errors Fix command timeout on LOCATE/SPACE to the last record on the tape Fix unexpected reboot that sometimes occurs by reading mixed encrypted data near BOP Fix unexpected endmarker found (FSC 6601) Fix drive hang after rechuck failure due to head stuck during unload (FSC 78E3) Improve MTR (Improve transition from deceleration to unspool in MTR) Fix unload command hangs (no response) after unload failure with 2E0C (bottom sensor error) Do not allow initialization of read only tape gens Fix Read error case (FSC 7274) Fix SAS loopback diagnostic Allow to load a tape whose validity is rfx=300 = (FSC 8C3E) Adjust calibration criteria in special cases Improve calibration in certain conditions Prevent tape run-off due to command queuing issue (FSC 2E12) Remove LP3 passes from media EOL criteria Fix Read failure at EOW (FSC 5175) Fix read SAW (Suspended Append Write) DS on BOW (FSC 6353) Refresh tape pack after MTR Fix Read failure on BOW (FSC 6353) Fix Write failure when writing from BOT on brand new tape in append-only mode (FSC 6017) Fix append failure FIX tension shutdown due to inboard/outboard velocity mismatch (if LTU is enabled (disabled by default)) Prevent drives with degraded tracks from writing. Drive will post FSC B3B1/D058 or 53B1/1058 and will be fenced until replaced Add support for service action 1Eh for Report/Set Automation Device Attributes commands Fix write failure (FSC 2C30) on uninitialized WORM tape 20 minutes after loading cartridge Fix for Read command timeout ===================================================================== Drive Code Level: LTO8_MA71 (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- Return better error codes Sense data positioning parameters corrected Tape positioning and tape motion control improvements Correctly set tape alert 32 and assign a different error code for Read CRC errors Error handling enhancements ===================================================================== Drive Code Level: LTO8_M571 (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- Log Sense parameter collection and reporting improvements Error recovery handling and enhancements Unload and Load command and processing improvements EOD processing improvements Tape handling and servo improvements ===================================================================== Drive Code Level: LTO8_KAH1 (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- Mode Sense and Log Sense improvements Read error recovery handling and enhancements Write command and write error recovery handling and enhancements Reset due to bad link quality Improved transfer length and overlap handling Correct parameter checking for Write Attribute command Host interface logging in and task management message improvements Allow unload to invoke mid tape recovery after un-spool operation failure Tape servo improvements Not reset after power saving unthread Update Erase command time-out for LTO8 ===================================================================== Drive Code Level: LTO8_K4K1 (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- Host interface command and abort handling improvements Error recovery and sense reporting enhancements Fix wrong motion status report (wrong "writing") to library FCR3356: Inquiry page C2h (drive bar codes) Servo and tape handling improvements Prevent resets that could happen on entering power saving mode or during unload ===================================================================== Drive Code Level: LTO8_JAYF (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- Host interface and queued task management improvements Cartridge memory improvements for MAM attributes Servo detection and tension control enhancements Avoid returning incorrect density code when not loaded/ready Improvement of Performance Diagnostic SCD displays "0" instead of blank incorrectly ===================================================================== Drive Code Level: LTO8_JAY1 (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- Improve and enhance host interface transfers and attachment Improve log page data reporting Fix medium access queue hangs Improve LUN1 sense, data, and inquiry handling Correct SCD display for error indications Write Attribute command improvements Error recovery enhancements T10-OOB: do not clear KME error/info on repositions Archive mode improvements Tape and head servo control improvements ===================================================================== Drive Code Level: LTO8_J4D1 (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- Improve host interface communications Add tension control and error recovery procedures (ERP) LN1: not set VS bits in inquiry data Servo control improvements Improve head brush ERP Fixes for log sense and tape alert data Request clean for errors that require re-chuck ERP ===================================================================== Drive Code Level: LTO8_HB83 (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- Partitioning medium should not change Type M back to Type A FCH-Field: Unhandled interrupt due to port offline/online ADI panic on NULL exchange request for logout ===================================================================== Drive Code Level: LTO8_HB81 (LTO8_HH_SAS) Fixes --------------------------------------------------------------------- M8 cartridge initialization and handling Tape path temperature acquisition and reporting improvements Servo handling improvements FCR 3336: Additional M8 MAM changes Read error recovery procedure to use slow speed for better servo tracking Host interface command enhancements