NOTE: This fix pack is for 1.1, 1.1.1, 1.1.1.1.  If you are at using a version prior to 1.1 you will need to install 1.1.1.4 from passport advantage.

If you have internet access to the sMash repository SKIP steps 1 - 4. 
     1. Download the sMash-repository1.1.1.4.zip and if the sMash RTE is being used also download sMash_rte-repository-1.1.1.4.zip. 
     2. Rename the modules directory in your repository home directory. For example, in $zeroHome/zero/zero-repository/stable/ rename modules modules-backup, where $zeroHome is your sMash Command Line Interface (CLI) root
     3. Unzip the sMash-repository1.1.1.4.zip into your repository home directory. For example, $zeroHome/zero/zero-repository/stable
     4. If sMash RTE is required, unzip the sMash_rte-repository-1.1.1.4.zip into your repository home directory. For example, $zeroHome/zero/zero-repository/stable
Execute steps 5 - 10 if you have internet access to the sMash repository, or if you have completed steps 1 - 4.
     5. In a console navigate to $zeroHome
     6. Run the following [to update the CLI]: zero update
     7. In a console navigate to $appRoot, where $appRoot is the root directory of the application to be updated. 
     8. Stop the application [if it has not been stopped already]: zero stop
     9. Run the following [to update the module(s) for this application]: zero update
     10. Start your application: zero start 
Repeat steps 7 - 10 for each desired application.
     11. If you created a modules-backup directory in your repository home directory, you should delete it.

NOTE: zero_1.1.1.4.31277.zip is included in the fix pack, but it should not be used unless there is a problem which requires the latest (1.1.1.4) CLI.  
If you need to install the 1.1.1.4 CLI refer to the sMash DE download page (http://www.projectzero.org/download/) for CLI installation instructions.